Ravenna (networking)

From HandWiki
Short description: System for real-time transport of audio over IP networks
RAVENNA
Manufacturer Info
ManufacturerALC NetworX (a Lawo company)
Development date2010; 14 years ago (2010)
Network Compatibility
SwitchableYes
RoutableYes
Ethernet data ratesGigabit Ethernet
Audio Specifications
Maximum sampling rate192 kHz (PCM), 384 kHz (DSD/DXD-Format)[1]
Maximum bit depth24-bit[2]

Ravenna is a technology for real-time transport of audio and other media data over IP networks. Ravenna was introduced on September 10, 2010 at the International Broadcasting Convention in Amsterdam.[3][4] Ravenna can operate on most existing network infrastructures using standard networking technology. Performance and capacity scale with network performance. Ravenna is designed to match broadcasters' requirements for low latency, full signal transparency and high reliability. Fields of application include in-house signal distribution for broadcasting houses and other fixed installations, flexible setups at venues and live events, outside broadcasting support, and inter-studio links across wide area network links and production facilities.

Standard protocols

Ravenna is an IP-based solution. As such it is based on protocol levels at or above layer 3 of the OSI reference model. All protocols and mechanisms used within Ravenna are based on widely deployed and established standards:

  • Streaming is based on the well-established RTP / RTCP protocols with payload formats defined by various RFCs (i.e. RFC 3550, RFC 3551 et al.).
  • Both unicast and multicast are supported on a per-stream basis.
  • Stream management and connection is achieved through SDP or RTSP protocol.
  • QoS is based on DiffServ mechanism
  • Device configuration and discovery is executed through the use of DHCP / DNS services or zeroconf mechanisms.
  • Low-level device configuration is accomplished through independent web services via http protocol.
  • Time synchronization is maintained via PTPv2 (IEEE 1588-2008).
  • Stream redundancy is based on SMPTE ST 2022-7 standard.

Open technology

Ravenna is an open-technology standard without a proprietary licensing policy. A first-draft version of the Ravenna specification[5] is publicly available. The development is jointly executed within the RAVENNA Partner Group under the leadership of ALC NetworX GmbH, Munich. Current Ravenna partners include:

  • 2wcom (Germany)
  • AEQ (Spain)
  • AETA (France)
  • Archwave (Switzerland)
  • AVT Audio Video Technologies GmbH (Germany)
  • Calrec (UK)
  • Digigram (France)
  • DirectOut (Germany)
  • Dolby (USA)
  • Genelec (Finland)
  • Infomedia (China)
  • Lawo (Germany)
  • Merging Technologies (Switzerland)
  • Neumann (Germany)
  • Orban (USA)
  • Qbit (Germany)
  • Riedel Communications (Germany)
  • Ross Video (Canada)
  • Schoeps (Germany)
  • SciSys (Germany)
  • Sonifex (UK)
  • Sound4 (France)
  • The Telos Alliance (USA)
  • WorldCast Systems (France)
  • and others[6]


Standardization activities

Ravenna contributed to the AES67 standardization efforts.[7][8] Ravenna is compatible with AES67 and all relevant mechanisms, protocols and formats used for synchronization, transport and payload mandated by AES67 are fully supported.

Ravenna contributed to the SMPTE 2110 standardization efforts.[lower-alpha 1] Ravenna is compatible with the audio parts SMPTE ST 2110-30[10] and -31.

Awards

Ravenna was a recipient of a Technology & Engineering Emmy Award in 2020 for Development of Synchronized multi-channel uncompressed audio transport over IP Network.[11]

Notes

  1. SMPTE ST 2110-31 - AES3 Transparent Transport was drafted based on Ravenna's AM824 - RTP payload format for AES3.[9]

References

External links