Engineering:Smith & Wesson Model 586

From HandWiki
Smith & Wesson Model 586
Smith and Wesson 586-7.jpg
586-7 Revolver with 7-round capacity and factory wood grips and hammer lock
TypeRevolver
Place of originUnited States
Production history
ManufacturerSmith & Wesson
Produced1981–1999
2012–present
Variants586-(1 through 8)
686 (stainless steel)
Specifications
Cartridge.357 Magnum
.38 Special
ActionDouble action and single action
Feed system6-round or 7-round cylinder
SightsAdjustable rear open sights

The Smith & Wesson Model 586, is a six- or seven-shot double-action revolver chambered for the .357 Magnum cartridge; it will also chamber and fire .38 Special cartridges. The Model 586 has a carbon steel construction and is available in a blued or nickel finish; it is essentially the same firearm as the Model 686, which has stainless steel construction. It is also known as the Distinguished Combat Magnum.

Smith & Wesson 586-1 with 6 inch barrel

Description

In addition to being able to chamber and fire .357 Magnum cartridges, the 586 will chamber and fire .38 Special cartridges as well as .38 Special +P (overpressure ammunition). The 586 has been available with 2½ in, 3 in, 4 in, 6 in, and 8⅜ in (64, 76, 102, 153, and 214 mm) barrel lengths as standard models and other barrel lengths either by special order from S&W's Performance Center custom shop, or acquired from or built by after-market gunsmiths.[1] The barrel has a twist rate of 1/18.75 for the 158 grain bullet.[citation needed]

The Model 586 uses S&W's L (medium) revolver frame, with a K-frame-sized grip mated to a larger diameter cylinder. During the 1980s, Smith & Wesson developed its L-frame line of .357 Magnums: the Smith & Wesson Model 581, Model 586, Smith & Wesson Model 681, and Model 686. The Model 581 had a fixed notch type rear sight, whereas the 586 used a target style adjustable rear sight. These handguns had a major effect on both law enforcement and sporting markets. The 586 was introduced in 1980, while the 581 was discontinued in 1988.[1]

The K-frame guns, though popular with police departments, were felt to be too light for full-power .357 ammunition, and a heavier and more durable gun was desired, in the same frame size. (This would avoid the complaints attaching to the larger, heavier N-frame Model 29 and Model 58.[2]) Designed with input from official S&W historian Roy Jinks, the L-frame was the result, and it quickly gained praise from policemen and hunters.[1]

The 586 was discontinued in 1999. After a 13-year absence, it was reintroduced in 2012 with the aforementioned safety modifications, plus an improved yoke, as the 586-8 variant.[1] These are produced with 4- and 6-inch barrel lengths, as part of Smith & Wesson's Classic line of revolvers.

Controversy rose when Smith & Wesson cooperated with the Clinton administration to modify their line of revolvers with an internal locking mechanism and other changes. That agreement resulted in a boycott by many firearms enthusiasts, which led to a dramatic drop in stock price, and nearly bankrupted the company. Smith & Wesson was sold to Saf-T-Hammer for a fraction of its true value.[3]

Engineering and production changes

  • 586 (no dash), 1980 Introduction model
  • 586-1, 1986 radius stud package, floating hand
  • 586-M, 1987 Product warning by S&W: M over stamped to signify a modification by factory or warranty station for 586 and 586-1
  • 586-2, 1987 changed hammer nose, bushing and associated parts
  • 586-3, 1988 new yoke retention system
  • 586-4, 1993 change rear sight leaf, drill and tap frame, change extractor, Hogue grips
  • 586-5, 1997 delete 8 3/8" barrel/change to MIM thumbpiece/Ship with Master trigger locks
  • 586-6, 1997 change frame design to eliminate cylinder stop stud, eliminate serrated tangs, MIM hammer and trigger, change to internal lock.
  • 586-7, 2004 Performance Center .38 Super, 6-Shot unfluted cylinder, 4" barrel, Stainless Steel, 250 Made, seven shot with internal lock
  • 586-8, 2012 Reintroduction as a Classic Series with internal lock 6-shot 4" and 6" RR, WO TS SB[4]

Recall

In 1987, seven years after the release of the Model 686, there were reports of cylinder binding with some types of standard .357 Magnum ammunition for L-frame revolvers manufactured before August 1987. S&W published a product warning and authorized free modification to the revolver. All affected revolvers repaired for this recall were stamped with an M on the yoke near the model number. Thus it is known as the M modification for all 686, 686-1, 586, and 586-1 revolvers.[5]

References

  1. 1.0 1.1 1.2 1.3 Supica, Jim; Nahas, Richard (2006). Standard Catalog of Smith & Wesson (3rd ed.). Iola, WI: Gun Digest Books. [page needed]
  2. Grandpa Willie (2001). "Smith & Wesson's .41 Magnum". http://www.freepatriot.com/41magnum.php. 
  3. Austin, Christina (January 21, 2013). "How Gun Maker Smith & Wesson Almost Went Out Of Business When It Accepted Gun Control". https://www.businessinsider.com/smith-and-wesson-almost-went-out-of-business-trying-to-do-the-right-thing-2013-1. 
  4. Supica, Jim; Nahas, Richard (2016). Standard Catalog of Smith and Wesson (4th ed.). Iola, WI: Gun Digest. p. 298. ISBN 978-1-4402-4563-3. https://www.gundigeststore.com/product/standard-catalog-of-smith-wesson-4th-edition/. Retrieved 6 January 2020. 
  5. Smith & Wesson (January 1988). "Product Warning". Popular Mechanics 165 (1): 11. https://books.google.com/books?id=IuQDAAAAMBAJ&dq=model+686+L-frame&pg=PA11.