Engineering:Mendeleev Tank

From HandWiki
Mendeleev Tank
Mendeleev tank.jpg
Artist sketch of the Mendeleev tank
TypeTank
Place of originRussia
Production history
DesignerVasiliy Donald Mendeleev
Designed1911-1916
Manufacturernever built
Unit cost$ 1,750,000
Specifications
MassApproximately 173.2 tons
Length13 m (42 ft 8 in) (with gun)
10 m (32 ft 10 in) (hull)
Height4.45 m (14 ft 7 in) (machine gun turret up)
3.5 m (11 ft 6 in) (machine gun turret lowered)
Crew11-12

ArmourFront: 150 mm (5.9 in)
Sides and rear: 100 mm (3.9 in)
Main
armament
120 mm Canet gun (51 shells)
Secondary
armament
1 x light machine gun
EnginePetrol gasoline engine taken from a submarine
250 hp (190 kW)
Power/weight1.44 hp/t
SuspensionPneumatic piston suspension
SpeedMaximum 24 km/h (15 mph)

The Mendeleev Tank was a proposed early tank design by Russian naval engineer Vasiliy Mendeleev, son of Russian scientist Dimitri Mendeleev, who created the modern periodic table. The vehicle was envisioned by Mendeleev during his time working at the Kronshtadt Marine Engineering School in Saint Petersburg, Russia, from 1911 to 1915. Its purported purpose was to be a "landship" immune to all enemy fire and able to cross large battlefields while providing heavy artillery support to troops using a 120 mm gun. The proposed tank was one of the heaviest tank designs of all time; at 173.2 tons it would have been nearly the same weight as the World War II Germany Panzer VIII Maus superheavy tank.[1]

Design

The Mendeleev Tank was of a complete rectangular construction, with its main gun at the front, a machine gun turret mounted to the roof just aft of the middle and tracks protruding directly from the bottom of the hull. The tank was supposed to have a crew of eight operating it.

Armament

The Mendeleev Tank was exceptionally well armed for tank design concept at its time. It was slated to have a 120 mm (4.7 in) Canet naval gun with 57 rounds of ammunition, mounted directly at the front of the tank, much larger than the common calibres of tanks in both World War I and World War II. For comparison, the armament of the United Kingdom Mark IV tank was two 57 mm QF 6-pounder 6 cwt Hotchkiss guns. The gun was able to swivel left and right as well as elevate and depress. In addition, the gun was supposed to feature a recoil system rather than be placed on a fixed rigid mount, a concept very advanced for the time.[2] The Canet gun would be used to provide direct artillery fire against enemy units, making the Mendeleev Tank essentially a mobile artillery platform. The tank was also equipped with a light machine gun installed in a turret that was rotatable as well as being able to be retracted when not in use to lower the silhouette of the vehicle.

Propulsion

Mendeleev designed a novel form of tracked propulsion of the vehicle that differed vastly from other designs of the time. His plans for the vehicle featured a continuous track whose circumference enveloped the entire side of the vehicle. The advanced part of this design was the use of a pneumatic piston suspension that allowed the individual road wheels to be lowered or elevated to a desired height. This would've allowed for very stable traversal of rough or uneven terrain as well as Mendeleev's idea of allowing the tank to completely lower the hull onto the ground, turning the tank into a mobile fortress that could bunker down when need be, protecting the most vulnerable area of the vehicle; the running gear. This feature also was supposed to combine with a special device which could move it on rails, where it could even move by its own, or with the aid of a locomotive.[3] To propel the vehicle, the Mendeleev tank was supposed to use a petrol gasoline engine from a submarine with 250 horsepower, giving the 173.2 ton vehicle a power to weight ratio of 1.44 hp/t. The vehicle was supposed to be able to reach a maximum speed of 24 km/h, though whether this would be achievable in actuality is unknown.

Protection

The Mendeleev tank featured extremely heavy armour for a vehicle of its time, with armour made from heavy steel plating that likes of which were found on warships that ranged from 150 mm thick at the front to 100 mm thick around the sides and rear. In comparison, tanks in WWI were armoured only for protection from rifle fire and machine guns having maximum armour thickness of 30 mm on the German A7V, while the far more numerous British Mark IV had armour 12 mm thick. The planned armour of the Mendeleev was thicker than found in WWII such as the formidable German Tiger II heavy tank which had around 150 mm of armour at the front. The Mendeleev's exceptional protection came at the cost of weight, with the tank weighing in at 173.2 tons, making it even heavier than the German K-Wagen, a similar superheavy tank design that almost saw fruition.[4]


History

The initial design is thought to date back to as early as 1898. It was worked upon in 1911, and presented in 1916.[5] However, the vehicle was never constructed due to the little support it received by backers or the government. Mendeleev even attempted to construct the vehicle himself, but it was never started, causing the design to remain as only a series of plans and drawings.[6]

Footnotes