Engineering:La Noumbi

From HandWiki
Tempera Porvoo 4.JPG
Tempera at Porvoo oil refinery
History
Name: Tempera
Owner:
  • SEB Leasing Oy (2002–2015)[1][2]
  • Perenco (2015–)
Operator: Neste Shipping Oy[2]
Port of registry: Porvoo,  Finland
Route: Primorsk–Porvoo–Naantali[3]
Ordered: 2001[4]
Builder: Sumitomo Heavy Industries Ltd., Yokosuka, Japan [5]
Cost: 60–70 million euro (estimate)[6]
Completed: August 2002[7]
In service: 2002–2017[5]
Identification:
Fate: Sold to be converted to FPSO[8]
History
Name: La Noumbi
Owner: Dixtone Holdings
Port of registry:  Liberia
Acquired: 2017
In service: 2018–
Identification:
Status: Under conversion[8]
General characteristics (as oil tanker)[5]
Type: Crude oil tanker
Tonnage:
  • 64,259 GT
  • 106,034 DWT
Length: 252.0 m (826.77 ft) (overall)
Beam: 44.0 m (144.36 ft)
Height: 53.1 m (174 ft)
Draught:
  • 15.3 m (50 ft) (summer)
  • 8.6 m (28 ft) (ballast)
Depth: 22.5 m (74 ft)
Ice class: 1A Super
Installed power:
  • 2 × Wärtsilä 9L38B[1] (2 × 6,0 MW)
  • 2 × Wärtsilä 6L38B[1] (2 × 4.0 MW)
Propulsion:
Speed:
  • 15.2 knots (28.2 km/h; 17.5 mph) (max)[1]
  • 13.5 knots (25.0 km/h; 15.5 mph) (service)
  • 3 knots (5.6 km/h; 3.5 mph) (1 m (3.3 ft) ice)[9]
Crew: 15–20[10][11]

La Noumbi is a floating production storage and offloading (FPSO) unit operated by Perenco. The vessel, converted from the former Finnish Aframax crude oil tanker Tempera by Keppel Corporation, will replace an older FPSO unit in the Yombo field off the Republic of Congo in 2018.

Built at Sumitomo Heavy Industries in Japan in 2002, Tempera was the first ship to utilize the double acting tanker (DAT) concept in which the vessel is designed to travel ahead in open water and astern in severe ice conditions.[4] Tempera and her sister ship Mastera, built in 2003, were used mainly to transport crude oil, year-round, from the Russia n oil terminal in Primorsk to Neste Oil refineries in Porvoo and Naantali. In 2015, Neste sold Tempera to the oil and gas company Perenco for conversion to an FPSO.

Concept

Main page: Engineering:Double acting ship

Although icebreaking cargo ships had been built in the past, their hull forms were always compromises between open water performance and icebreaking capability. A good icebreaking bow, designed to break the ice by bending it under the ship's weight, has very poor open water characteristics and is subjected to slamming in heavy weather while a hydrodynamically efficient bulbous bow greatly increases the ice resistance.[12] However, already in the late 1800s captains operating ships in icebound waters discovered that sometimes it was easier to break through ice by running their vessels astern. This was because the forward-facing propellers generated a water flow that lowered the resistance by reducing friction between the ship's hull and ice.[13] These findings resulted in the adoption of bow propellers in older icebreakers operating in the Great Lakes and the Baltic Sea, but as forward-facing propellers have a very low propulsion efficiency and the steering ability of a ship is greatly reduced when running astern, it could not be considered a main operating mode for merchant ships.[14][15]

For this reason it was not until the development of electric podded propulsion, ABB's Azipod, that the concept of double acting ships became feasible. The superiority of podded propulsion in icebreaking merchant ships, especially when running astern, was proved when Finnish product tankers Uikku and Lunni were converted to Azipod propulsion in 1993 and 1994, respectively. Even though the ships were originally designed with icebreaking capability in mind, after the conversion ice resistance in level ice when running astern was only 40% of that when breaking ice ahead despite the ships being equipped with an icebreaking bow and not designed to break ice astern.[14][15]

History

Development and construction

Following the successful operation of the Azipod-converted tankers Uikku and Lunni in the Northern Sea Route, Kværner Masa-Yards Arctic Research Centre developed the first double acting tanker concept in the early 1990s. The 90,000 DWT tankers were designed to transport oil and gas condensate from the Pechora Sea in the Russia n Arctic, where ice conditions during winter can be considered moderate and the ships would operate mainly in astern mode, first to Murmansk and then Rotterdam, where most of the distance can be travelled in open water year round.[14] Other early double acting concepts included a similar ship with an icebreaking bow that would be utilized in summer time when the ship was traveling in areas with low ice concentration but with a risk of colliding with multi-year ice blocks.[15]

In early 2000s Fortum Shipping, the transportation arm of the Finnish energy company Fortum, started a major fleet renewal program to increase the efficiency and reduce the average age of its vessels.[16] The program also included replacing the company's old tankers, such as the 90,000-ton Natura, that were used to transport crude oil to the company's oil refineries in the Gulf of Finland. The old ships had traffic restrictions during the worst part of the winter because of their lower ice class of 1C and could not deliver their cargo all the way to the refineries in Porvoo and Naantali because they were denied icebreaker assistance. When this happened, the oil had to be transported to smaller ships of higher ice class at the edge of the ice — a practice that was both uneconomical and hazardous.[15]

To solve these problems Kværner Masa-Yards Arctic Research Centre developed a new 100,000 DWT Aframax tanker concept together with Fortum Shipping, which ordered two vessels from Sumitomo Heavy Industries in 2001. The new ships were designed to the highest Finnish-Swedish ice class, 1A Super, and to be capable of operating in all ice conditions encountered in the Baltic Sea. The possibility to operate in the Pechora Sea was also taken into account in the design process. Extensive ice model tests confirmed the vessel's operational capability in level ice, rubble fields, ice channels and ridges.[15]

The world's first double acting tanker and the largest 1A Super class oil tanker at that time, Tempera, was delivered from Yokosuka shipyard in late August 2002.[7][17] She was awarded the Ship Of The Year 2002 award by the Society of Naval Architects of Japan (SNAJ).[18] The second ship, Mastera, was delivered in the following year.[4][5] Both ships were named after the company's oil products.[19] While the price of the contract was not made public, the company later admitted that the 60–70 million euro estimate was "quite close to the truth". The ships were owned by ABB Credit, which leased them to Fortum for ten years.[6] The leasing business was later sold to SEB Leasing.

Tempera (2002–2018)

Since the beginning Tempera and Mastera have been used mainly for year-round transportation of crude oil from the Russian oil terminal of Primorsk to company's own oil terminals in Porvoo and Naantali,[3] where they have been the only ships capable of operating without delays or problems during the harshest winters.[20] Occasionally they have carried cargoes in the Gulf of Bothnia and even outside the Baltic Sea depending on the amount of oil in the refineries' storage tanks.[11][21] Tempera has also visited Murmansk, where she loaded crude oil from FSO Belokamenka.[22] However, due to draft restrictions the ships could not carry a full cargo of 100,000 tons to the port of Naantali until April 2010 — they had to stop at Porvoo on the way and unload 20,000 tons of oil to reduce the draft of the vessel.[23]

In 2005 Fortum's oil division was transferred to the re-established Neste Oil and the management of the ships, including the double acting tankers, was handed over to a subsidiary company Neste Shipping.

After almost a decade of successful operation without icebreaker assistance Tempera and Mastera remain the only double acting tankers operating in the Baltic Sea.[24] While other double acting ships have been built in the recent years, the tankers operated by Neste Shipping are also the only ones equipped with a bulbous bow designed primarily with open water performance in mind — the tankers and container ships built for the Russian Arctic have a more traditional icebreaking bow due to the more severe ice conditions.[25]

On 29 May 2015, Neste announced a decision to sell Tempera to Perenco.[26]

La Noumbi (2018 onwards)

In 2017, Tempera left the Baltic Sea and sailed around the Cape of Good Hope, headed for Singapore where she would be converted to a floating production storage and offloading (FPSO) unit at Keppel Corporation shipyard in 2017–2018, after which she would replace FPSO Conkouati at the Yombo field off the Republic of Congo. The conversion included installing additional accommodation capacity as well as production-related equipment.[8]

The converted vessel was renamed La Noumbi on 26 July 2018.[27]

Design (as oil tanker)

General characteristics

Tempera is 252.0 metres (826.8 ft) long overall and 237.59 metres (779.5 ft) between perpendiculars. The moulded breadth and depth of her hull are 44.0 metres (144.4 ft) and 22.5 metres (74 ft), respectively, and from keel to mast she measured 53.1 metres (174 ft). Her gross tonnage is 64,259 and net tonnage 30,846, and the deadweight tonnage corresponding to the draft at summer freeboard, 15.3 metres (50 ft), is 106,034 tons, slightly less than in Mastera. In ballast Tempera draws only 8.6 metres (28 ft) of water.[5]

The foreship of Tempera is designed for open water performance with a bulbous bow to maximize the hydrodynamic efficiency. The ship is, just like any other ice-strengthened vessel, also capable of running ahead in light ice conditions. The stern is, however, shaped like an icebreaker's bow, and Tempera is designed to operate independently in the most severe ice conditions of the Baltic Sea.[4] For this purpose the ship is also equipped with two bridges for navigating in both directions.[5] The ship is served by a crew of 15 to 20 depending on operating conditions during winter and maintenance work during summer.[10][11]

Tempera is classified by Lloyd's Register of Shipping.[5]

Cargo tanks and handling

Tempera has six pairs of heated, partially epoxy-coated cargo tanks and one pair of fully coated slop tanks, all divided by a longitudinal center bulkhead and protected by double hull, with a combined capacity of 121,158.2 cubic metres (4,278,660 cu ft) at 98% filling. For cargo handling she has three electrically driven cargo oil pumps with a capacity of 3,500 m3/h × 130 m and one cargo oil stripping pump rated for 300 m3/h × 130 m. The cargo can be loaded in 10 hours and discharged in 12 hours. Each cargo tank has two and both slop tanks one automated tank cleaning machines as well as holes for portable tank cleaning machines.[5]

The ship's ballast water capacity of 46,922.4 cubic metres (1,657,050 cu ft) is divided into sixteen segregated ballast tanks, six pairs located in the double hull around the cargo tanks, two fore peak tanks and two aft peak tanks.[7] She has two electrically driven ballast pumps rated at 2,500 m3/h × 35 m and 3,000 m3/h × 70 m.[5] The ballast capacity is needed to maintain correct trim especially during drydocking — the empty ship has an aft trim of 3 metres (9.8 ft) and an uneven weight distribution may damage the hull girder.[10]

Power and propulsion

Tempera has diesel-electric powertrain with four main generating sets, two nine-cylinder Wärtsilä 9L38B and two six-cylinder 6L38B four-stroke medium-speed diesel engines, with a combined output of 20 MW (27,000 hp). The main engines are equipped with exhaust gas economizers. In addition Tempera has one auxiliary diesel generator that can be used when the ship is at port. The auxiliary generator, six-cylinder Wärtsilä 6L26A, has an output of 1.7 MW (2,300 hp). While underway at 13.5 knots (25.0 km/h; 15.5 mph), the fuel consumption of the ship's main engines is 56 tons of heavy fuel oil per day when loaded and 40 tons per day in ballast. Her tanks can store 2,890.1 cubic metres (102,060 cu ft) of heavy fuel oil for the main engines, 308.2 cubic metres (10,880 cu ft) of diesel oil for the auxiliary generator, steam boilers and inert gas system, and 63.2 cubic metres (2,230 cu ft) of lubrication oil.[5]

Tempera and her sister ship are the first tankers propelled by ABB Azipod electric azimuth thrusters capable of rotating 360 degrees around the vertical axis. The pulling-type VI2500 pods in these two ships, with a nominal output of 16 MW and 7.8-metre (26 ft) fixed-pitch propellers turning at 86 rpm, are the most powerful ice-strengthened Azipod units ABB has ever produced.[6][28] The forward-facing propeller increases the propulsion efficiency due to optimal water flow to the propeller and thus improves fuel efficiency. In addition an azimuthing thruster's ability to direct thrust to any direction also results in excellent manoeuvrability characteristics that exceeds those of ships utilizing traditional mechanical shaftlines and rudders.[29] The turning circle of Mastera and Tempera is only half a kilometer at full speed, half of that of a traditional oil tanker of the same size. This is a significant safety factor as the stopping distance of a traditional tanker can be up to 2.5 kilometres (1.6 mi).[30]

For maneuvering at low speeds in harbours, Tempera is also equipped with two 1,750 kW bow thrusters.[9]

Icebreaking capability

The icebreaking capability of the double acting tankers proved to be superior to other ships since the beginning — in shuttle service between Primorsk, Russia, and the Finnish refineries the tankers require no icebreaker assistance and have even acted as an icebreaker for other merchant ships that have utilized the wide channel opened by the Aframax tanker.[6][25] However, this has not been intentional — when the world's largest 1A Super class ice tanker Stena Arctica, also owned by Neste Shipping, became stuck in ice outside the port of Primorsk during the winter of 2009–2010, a decision was made to leave the assisting to Russian icebreakers.[10]

The ships have performed beyond expectations in both level ice up to 1 metre (3.3 ft) thick, which can be broken in continuous motion at 3 knots (5.6 km/h; 3.5 mph),[9] and ridges up to 13 metres (43 ft) deep, which can be penetrated by either allowing the forward-facing propeller to mill (crush) the ice or breaking the ridge apart with the propeller wash.[15][31] While the vessels have been immobilized occasionally by pack ice, they have been able to free themselves by using the rotating propeller pod to clear the ice around the hull.[32]

References

  1. 1.0 1.1 1.2 1.3 Vapalahti, H: Finnish illustrated List of Ships 2007. Judicor Oy, 2008.
  2. 2.0 2.1 2.2 2.3 2.4 2.5 "Tempera (9235880)". French Ministry for Transport. http://www.equasis.org/EquasisWeb/restricted/ShipInfo?fs=Search&P_IMO=9235880. 
  3. 3.0 3.1 Remmiä kaulan ympärillä kiristetään jatkuvasti. Merimies - Sjömannen, 3/10. Suomen Merimies-Unioni. Retrieved 2011-09-20.
  4. 4.0 4.1 4.2 4.3 The development of the new double acting ships for ice operation . Aker Arctic Technology Inc., 2001.
  5. 5.00 5.01 5.02 5.03 5.04 5.05 5.06 5.07 5.08 5.09 5.10 5.11 "Mastera/Tempera". Neste Oil. 2004. Archived from the original on 29 September 2011. https://web.archive.org/web/20110929062316/http://www.nesteoil.com/binary.asp?GUID=1A6F31A4-6C93-4D6D-B791-61D99C5AF75F. Retrieved 20 September 2011. 
  6. 6.0 6.1 6.2 6.3 Potkurikeksintö herätti kilpailijat. Tekniikka & Talous, 9 October 2003. Retrieved 2011-09-19.
  7. 7.0 7.1 7.2 TEMPERA Tanker double act. The Motor Ship, 1 October 2002. Retrieved 2011-09-26.
  8. 8.0 8.1 8.2 Keppel secures conversion and repair projects worth S$85 million. VesselFinder, 28 June 2017. Retrieved 2017-06-28.
  9. 9.0 9.1 9.2 Fortum ́s Double Acting Tankers. ABB. Retrieved 2014-04-03.
  10. 10.0 10.1 10.2 10.3 Tempera telakalla. Vapaavahti 4/2010, pages 4-7. Merimiespalvelutoimisto, 2010.
  11. 11.0 11.1 11.2 Varmoilla jäillä. Refine 1/07, pages 25-27. Neste oil, 2007.
  12. Kujala, P and Riska, K: Talvimerenkulku (TKK-AM-13). Department of Applied Mechanics, Helsinki University of Technology, 2010.
  13. Aker Arctic Technology Inc.: Icebreaking Supply Vessels Arcticaborg and Antarcticaborg . Retrieved 2010-02-08.
  14. 14.0 14.1 14.2 Juurmaa, K et al.: New ice breaking tanker concept for the arctic (DAT) . Kvaerner Masa-Yards Arctic Technology, 1995.
  15. 15.0 15.1 15.2 15.3 15.4 15.5 Juurmaa, K et al.: The development of the new double acting ships for ice operation. Kvaerner Masa-Yards Arctic Technology, 2001 and 2002 .
  16. NextStop - Merten valtiaat. Refine 2/06, page 24. Neste Oil, 2006.
  17. Ice-class tankers. Lloyd's Register, 16 April 2004. Retrieved 2011-09-26.
  18. The Ship of The Year 2002 Award goes to the Tempera. SEA Japan No. 300, August–September 2003.
  19. Refine 1/08, page 23. Neste Oil, 2008.
  20. Opening up Arctic oil resources. High Technology Finland 2006. Retrieved 2011-09-26.
  21. Ahteri edellä Primorskiin. Rannikkoseutu, 13 April 2011. Retrieved 2011-09-26.
  22. Tempera Murmanskissa. Retrieved 2012-06-07.
  23. Neste Oilin tankkialus ajoi ensimmäisenä uutta syväväylää Naantaliin. Helsingin Sanomat, 25 April 2010. Retrieved 2011-09-26.
  24. A passion for ice. High Tech Finland 2011. Retrieved 2011-09-26.
  25. 25.0 25.1 Anatoly Gorshkovskij & Göran Wilkman: "Norilskiy Nickel" a Breakthrough in Cost Efficient Arctic Transports . Aker Arctic Technology Inc, 2007. Retrieved 2010-06-07.
  26. Neste myy öljytankkerin. Kauppalehti, 29 May 2015. Retrieved 2015-05-29.
  27. Keppel Shipyard Names Converted FPSO for Perenco. World Maritime News, 26 July 2018. Retrieved 2018-08-12.
  28. References - Propulsion Products. ABB. Retrieved 2015-05-28.
  29. Azipod® Propulsion, ABB
  30. Fortum toi Itämerelle ketterän öljytankkerin, Tekniikka & Talous, 2002-11-14
  31. Opening up the Arctic. High Technology Finland 2005. Retrieved 2010-09-26.
  32. Oil Tanker Maestra cuts backward course through solid ice. Helsingin Sanomat International Edition, 1 April 2003. Retrieved 2011-09-26.

External links