Engineering:Honda SS125A

From HandWiki
Short description: Motorcycle manufactured by Honda from 1967 through 1969
Honda SS125
1969 Honda SS125 right side.jpg
1969 Honda SS125
ManufacturerHonda
Production1967–1969[1]
AssemblyJapan
PredecessorHonda CS125
SuccessorHonda CB125, CB125K
ClassStandard
Engine124 cc (7.6 cu in) air-cooled SOHC parallel twin
Bore / stroke44 mm × 41 mm (1.7 in × 1.6 in)[2]
Compression ratio9.4:1[2]
Power13 PS (9.6 kW) @ 10,000 or 10,500 rpm[3]
Ignition typeSix volt points
Transmission4-speed manual[1]
Frame typePressed steel "T-bone" type frame
Suspension
BrakesSingle leading shoe drum front and rear
Tires
  • Front: 2.75 x 17
  • Rear: 2.75 x 17
[2]
Weight105 kg (231 lb)[2] (dry)
Fuel capacity8.2 L (1.8 imp gal; 2.2 US gal)[2]
Oil capacity1.2 L (0.26 imp gal; 0.32 US gal)[2]

The Honda SS125A is a motorcycle manufactured by Honda from 1967 through 1969.

The SS125A was based on the Japan-only Honda CS125 along with two other variants, the CD125 and the CL125A, all three of which shared many common components with the CS125. The larger capacity CD175 was also similar in design, up to 1969, although with a more touring-oriented styling.

Although the variants shared common components, many were unique to this range and, combined with the relatively short production run, can make spare parts difficult to obtain today. Certain items, such as silencers (mufflers) for the low slung exhaust[1] are very rare and command a premium when sold.

In spite of its stylish appearance,[4][5] the motorcycle was criticised for lack of performance,[6] and was effectively superseded by the CB125 in 1971.

Specification

1969 Honda SS125 "sloper" engine

The SS125A had 17 inch wheels; the front rim was either 1.4 inches or 1.6 inches wide while the rear rim was 1.6 inches wide.[2] The 124 cc twin cylinder engine was basically same as the earlier CA95/CB92 layout, using the left side of the engine for the timing chain to the camshaft.[1] It used a Keihin Seiki vacuum carburetor, as opposed to the earlier engines, which were equipped with a slide valve type. The home market (Japan) version was built using a 180 degree crankshaft, as opposed to the 360 degree layout in the U.S.models.[3]

Notes

  1. 1.0 1.1 1.2 1.3 Mitchel, Doug (2005). Honda Motorcycles: Everything You Need to Know About Every Honda Motorcycle Ever Built. Iola, WI US: KP Books. p. 47. ISBN 0-87349-966-2. https://books.google.com/books?id=avgdqBh0O0IC&pg=PA47. Retrieved 2014-11-11. 
  2. 2.0 2.1 2.2 2.3 2.4 2.5 2.6 Honda 125 Model CD125 CD125A SS125A CL125A Owner's Manual. Japan: Honda Motor Co., Ltd. 1968. pp. 54. 
  3. 3.0 3.1 Shop manual Honda 125 175. Japan: Honda Motor Co., Ltd. 1972. 
  4. "The Honda Ss125 Gallery" , Classic Motorbikes.
  5. "Interview: Denny Berg". Warkworth, NZ: Garagista Media. http://www.bikeexif.com/denny-berg-cobra-engineering. 
  6. Silver, Bill (March 2013). "Guide to 125-250cc Honda Street Twins". Topeka, Kansas US: Ogden Publications. CL125A and SS125A (1967-69). http://www.motorcycleclassics.com/classic-japanese-motorcycles/street-twins-ze0z1303zgar.aspx#axzz3JJhPAF9F.