Engineering:Cantenna

From HandWiki
Short description: Type of antenna
5.5 GHz cantenna as a feed horn

A cantenna (a portmanteau blending the words can and antenna) is a homemade directional waveguide antenna, made out of an open-ended metal can.

Cantennas are typically used to increase the range (or discovery) of Wi-Fi networks.

Construction

A Pringles cantenna for Wi-Fi

The cylinder portion of the can may consist of metal-coated paperboard.

Although some designs are based on a Pringles potato chips can, this tube is too narrow to increase the 2.4 GHz signal by a useful amount,[1] although at 5 GHz it would be about the right size. However, a cantenna can be made from various cans or tubes of an appropriate diameter.[2] Some designs include a pole mount to elevate the cantenna.[3]

At 2.4 GHz, losses can occur if the cable from the cantenna to the Wi-Fi circuitry is too long. A more efficient cantenna can be made by minimising this length or connecting the cantenna directly to the Wi-Fi circuitry.[4]

Use

A cantenna on an OLPC laptop

Cantennas are typically used for extending a wireless local area network (WLAN).

The tiny design makes them ideal for mobile applications such as wardriving.

Cantennas can be used to increase cell phone range,[5] improve reception, and decrease noise.

A cantenna can be used as a satellite dish feed horn. The 5.5 GHz cantenna dimensions are almost perfect in that they make a good fit for the standard TV satellite dish. The resulting setup is a low-cost high-quality high-gain antenna.[6] Such setups are widely used in wireless community networks for long-distance Wi-Fi links.

Cantennas may be used with other RF devices such as wireless security cameras.[7]

See also

a Cantenna

References

External links