Engineering:6mm Optimum
 The 6mm AR (center) is near the "6mm Optimum". |
The "6mm Optimum" is a concept popularized in 1999 by military writer Stanley C. Crist.
History
Crist argued for the adoption of a 6mm service rifle chambering as a replacement for the venerable 5.56×45mm NATO and 7.62×51mm NATO, calculating that such a loading would be near the weight and minimal recoil of the lightweight 5.56 (.223 caliber) while nearer the terminal performance of the heavier 7.62, thereby permitting a single cartridge to serve in general-purpose machine guns, sniper rifles, and infantry carbines.[1][2]
Ballistics
Crist's specifications were that "6mm Optimum" ammunition achieve, with a 100 gr (6.5 g) bullet:
- Muzzle velocity: 880 m/s (2,900 ft/s)
- Velocity at 1200 m: 350 m/s (1,149 ft/s) (slightly over the speed of sound)
- Muzzle energy: 2,531 J (1,867 ft⋅lbf)
- Energy at 1200 m: 397 J (293 ft⋅lbf)
- Flight-time to 1200 m: 2.21 seconds
- Deflection at 1200 m: 3.8 m (151 in) in 4.5 m/s (10 mph) wind speed
- Maximum trajectory height: 6.2 m (244 in)
...of which he noted, "...even with a conservative estimate for the muzzle velocity of the 6mm Optimum cartridge, computed data for 1200-meter velocity, flight-time, wind-deflection, and trajectory height are all greatly superior to both 5.56 and 7.62 NATO rounds."[1]
See also
- Ballistic table
- 5.8×42mm (6mm bullet diameter)
- 6mm PPC
- 6mm AR
- 6mm ARC
- .243 Winchester Super Short Magnum
- 6 mm XC
- 6×45mm SAW
- 6-6.5x47 Lapua
- 6mm Lee Navy
- 6 mm caliber
- List of rifle cartridges
- Table of handgun and rifle cartridges
References
- ↑ 1.0 1.1 Crist, Stanley C. (September 1999). "Is 6mm the Optimum Caliber? A common Cartridge for Rifle and Machinegun". Infantry 72 (3). https://www.benning.army.mil/infantry/magazine/issues/1999/SEP-DEC/pdfs/SEP-DEC99.pdf. Retrieved September 15, 2020.
- ↑ "6mm Optimum Cartridge". C. Meyer. October 11, 2002. https://www.g2mil.com/6mm_optimum_cartridge.htm.
 |  |
