Earth:Biofouling

From HandWiki
Short description: Growth of marine organisms on surfaces
Current measurement instrument encrusted with zebra mussels
Plant organisms, bacteria and animals (freshwater sponges) have covered (fouled) the sheath of an electric cable in a canal (Mid-Deûle in Lille, north of France).

Biofouling or biological fouling is the accumulation of microorganisms, plants, algae, or small animals where it is not wanted on surfaces such as ship and submarine hulls, devices such as water inlets, pipework, grates, ponds, and rivers that cause degradation to the primary purpose of that item. Such accumulation is referred to as epibiosis when the host surface is another organism and the relationship is not parasitic. Since biofouling can occur almost anywhere water is present, biofouling poses risks to a wide variety of objects such as boat hulls and equipment, medical devices and membranes, as well as to entire industries, such as paper manufacturing, food processing, underwater construction, and desalination plants.

Anti-fouling is the ability of specifically designed materials (such as toxic biocide paints, or non-toxic paints)[1] to remove or prevent biofouling.[2]

The buildup of biofouling on marine vessels poses a significant problem. In some instances, the hull structure and propulsion systems can be damaged.[3] The accumulation of biofoulers on hulls can increase both the hydrodynamic volume of a vessel and the hydrodynamic friction, leading to increased drag of up to 60%.[4] The drag increase has been seen to decrease speeds by up to 10%, which can require up to a 40% increase in fuel to compensate.[5] With fuel typically comprising up to half of marine transport costs, antifouling methods save the shipping industry a considerable amount of money. Further, increased fuel use due to biofouling contributes to adverse environmental effects and is predicted to increase emissions of carbon dioxide and sulfur dioxide between 38% and 72% by 2020, respectively.[6]

Biology

Biofouling organisms are highly diverse, and extend far beyond the attachment of barnacles and seaweeds. According to some estimates, over 1,700 species comprising over 4,000 organisms are responsible for biofouling.[7] Biofouling is divided into microfoulingbiofilm formation and bacterial adhesion—and macrofouling—attachment of larger organisms. Due to the distinct chemistry and biology that determine what prevents them from settling, organisms are also classified as hard- or soft-fouling types. Calcareous (hard) fouling organisms include barnacles, encrusting bryozoans, mollusks such as zebra mussels, and polychaete and other tube worms. Examples of non-calcareous (soft) fouling organisms are seaweed, hydroids, algae, and biofilm "slime".[8] Together, these organisms form a fouling community.

Ecosystem formation

Biofouling initial process: (left) Coating of submerged "substratum" with polymers. (moving right) Bacterial attachment and extracellular polymeric substance (EPS) matrix formation.

Marine fouling is typically described as following four stages of ecosystem development. Within the first minute the van der Waals interaction causes the submerged surface to be covered with a conditioning film of organic polymers. In the next 24 hours, this layer allows the process of bacterial adhesion to occur, with both diatoms and bacteria (e.g. Vibrio alginolyticus, Pseudomonas putrefaciens) attaching, initiating the formation of a biofilm. By the end of the first week, the rich nutrients and ease of attachment into the biofilm allow secondary colonizers of spores of macroalgae (e.g. Enteromorpha intestinalis, Ulothrix) and protozoans (e.g. Vorticella, Zoothamnium sp.) to attach themselves. Within two to three weeks, the tertiary colonizers—the macrofoulers—have attached. These include tunicates, mollusks, and sessile cnidarians.[1]

Impact

Dead biofouling, under a wood boat (detail)

Governments and industry spend more than US$5.7 billion annually to prevent and control marine biofouling.[9] Biofouling occurs everywhere but is most significant economically to the shipping industries, since fouling on a ship's hull significantly increases drag, reducing the overall hydrodynamic performance of the vessel, and increases the fuel consumption.[10]

Biofouling is also found in almost all circumstances where water-based liquids are in contact with other materials. Industrially important impacts are on the maintenance of mariculture, membrane systems (e.g., membrane bioreactors and reverse osmosis spiral wound membranes) and cooling water cycles of large industrial equipment and power stations. Biofouling can occur in oil pipelines carrying oils with entrained water, especially those carrying used oils, cutting oils, oils rendered water-soluble through emulsification, and hydraulic oils.[citation needed][11]

Other mechanisms impacted by biofouling include microelectrochemical drug delivery devices, papermaking and pulp industry machines, underwater instruments, fire protection system piping, and sprinkler system nozzles.[2][8] In groundwater wells, biofouling buildup can limit recovery flow rates, as is the case in the exterior and interior of ocean-laying pipes where fouling is often removed with a tube cleaning process. Besides interfering with mechanisms, biofouling also occurs on the surfaces of living marine organisms, when it is known as epibiosis.[11][citation needed]

Medical devices often include fan-cooled heat sinks, to cool their electronic components. While these systems sometimes include HEPA filters to collect microbes, some pathogens do pass through these filters, collect inside the device and are eventually blown out and infect other patients.[12] Devices used in operating rooms rarely include fans, so as to minimize the chance of transmission. Also, medical equipment, HVAC units, high-end computers, swimming pools, drinking-water systems and other products that utilize liquid lines run the risk of biofouling as biological growth occurs inside them.[13]

Historically, the focus of attention has been the severe impact due to biofouling on the speed of marine vessels. In some instances the hull structure and propulsion systems can become damaged.[3] Over time, the accumulation of biofoulers on hulls increases both the hydrodynamic volume of a vessel and the frictional effects leading to increased drag of up to 60%[5] The additional drag can decrease speeds up to 10%, which can require up to a 40% increase in fuel to compensate.[5] With fuel typically comprising up to half of marine transport costs, biofouling is estimated to cost the US Navy alone around $1 billion per year in increased fuel usage, maintenance and biofouling control measures.[5] Increased fuel use due to biofouling contributes to adverse environmental effects and is predicted to increase emissions of carbon dioxide and sulfur dioxide between 38 and 72 percent by 2020.[6]

Biofouling also impacts aquaculture, increasing production and management costs, while decreasing product value.[14] Fouling communities may compete with shellfish directly for food resources,[15] impede the procurement of food and oxygen by reducing water flow around shellfish, or interfere with the operational opening of their valves.[16] Consequently, stock affected by biofouling can experience reduced growth, condition and survival, with subsequent negative impacts on farm productivity.[17] Although many methods of removal exist, they often impact the cultured species, sometimes more so than the fouling organisms themselves.[18]

Detection

Shipping companies have historically relied on scheduled biofouler removal to keep such accretions to a manageable level. However, the rate of accretion can vary widely between vessels and operating conditions, so predicting acceptable intervals between cleanings is difficult.

LED manufacturers have developed a range of UVC (250–280 nm) equipment that can detect biofouling buildup, and can even prevent it.

Fouling detection relies on the biomass' property of fluorescence. All microorganisms contain natural intracellular fluorophores, which radiate in the UV range when excited. At UV-range wavelengths, such fluorescence arises from three aromatic amino acids—tyrosine, phenylalanine, and tryptophan. The easiest to detect is tryptophan, which radiates at 350 nm when irradiated at 280 nm.[19]

Methods

Antifouling

Antifouling is the process of preventing accumulations from forming. In industrial processes, biodispersants can be used to control biofouling. In less controlled environments, organisms are killed or repelled with coatings using biocides, thermal treatments, or pulses of energy. Nontoxic mechanical strategies that prevent organisms from attaching include choosing a material or coating with a slippery surface, creating an ultra-low fouling surface with the use of zwitterions, or creating nanoscale surface topologies similar to the skin of sharks and dolphins, which only offer poor anchor points.[1]

Coatings

Non-toxic coatings
A general idea of non-toxic coatings. (Coating represented here as light pea green layer.) They prevent proteins and microorganisms from attaching, which prevents large organisms such as barnacles from attaching. Larger organisms require a biofilm to attach, which is composed of proteins, polysaccharides, and microorganisms.

Non-toxic anti-sticking coatings prevent attachment of microorganisms thus negating the use of biocides. These coatings are usually based on organic polymers.[20]

There are two classes of non-toxic anti-fouling coatings. The most common class relies on low friction and low surface energies. Low surface energies result in hydrophobic surfaces. These coatings create a smooth surface, which can prevent attachment of larger microorganisms. For example, fluoropolymers and silicone coatings are commonly used.[21] These coatings are ecologically inert but have problems with mechanical strength and long-term stability. Specifically, after days biofilms (slime) can coat the surfaces, which buries the chemical activity and allows microorganisms to attach.[1] The current standard for these coatings is polydimethylsiloxane, or PDMS, which consists of a non-polar backbone made of repeating units of silicon and oxygen atoms.[22] The non-polarity of PDMS allows for biomolecules to readily adsorb to its surface in order to lower interfacial energy. However, PDMS also has a low modulus of elasticity that allows for the release of fouling organisms at speeds of greater than 20 knots. The dependence of effectiveness on vessel speed prevents use of PDMS on slow-moving ships or those that spend significant amounts of time in port.[2]

The second class of non-toxic antifouling coatings are hydrophilic coatings. They rely on high amounts of hydration in order to increase the energetic penalty of removing water for proteins and microorganisms to attach. The most common examples of these coatings are based on highly hydrated zwitterions, such as glycine betaine and sulfobetaine. These coatings are also low-friction, but are considered by some to be superior to hydrophobic surfaces because they prevent bacteria attachment, preventing biofilm formation.[23] These coatings are not yet commercially available and are being designed as part of a larger effort by the Office of Naval Research to develop environmentally safe biomimetic ship coatings.[4]

Biocides
Main pages: Biology:Biocide and Engineering:Biomimetic antifouling coating

Biocides are chemical substances that kill or deter microorganisms responsible for biofouling. The biocide is typically applied as a paint, i.e. through physical adsorption. The biocides prevent the formation of biofilms.[1] Other biocides are toxic to larger organisms in biofouling, such as algae. Formerly, the so-called tributyltin (TBT) compounds were used as biocides (and thus anti-fouling agents). TBTs are toxic to both microorganisms and larger aquatic organisms.[24] The international maritime community has phased out the use of organotin-based coatings.[25] Replacing organotin compounds is dichlorooctylisothiazolinone. This compound, however, also suffers from broad toxicity to marine organisms.

Ultrasonic antifouling

Ultrasonic transducers may be mounted in or around the hull of small to medium-sized boats. Research has shown these systems can help reduce fouling, by initiating bursts of ultrasonic waves through the hull medium to the surrounding water, killing or denaturing the algae and other microorganisms that form the beginning of the fouling sequence. The systems cannot work on wooden-hulled boats, or boats with a soft-cored composite material, such as wood or foam. The systems have been loosely based on technology proven to control algae blooms.[26]

Energy methods

Pulsed laser irradiation is commonly used against diatoms. Plasma pulse technology is effective against zebra mussels and works by stunning or killing the organisms with microsecond-duration energizing of the water with high-voltage electricity.[8]

Similarly, another method shown to be effective against algae buildups bounces brief high-energy acoustic pulses down pipes.[27]

Other methods

Regimens to periodically use heat to treat exchanger equipment and pipes have been successfully used to remove mussels from power plant cooling systems using water at 105 °F (40 °C) for 30 minutes.[28]

The medical industry utilizes a variety of energy methods to address bioburden issues associated with biofouling. Autoclaving typically involves heating a medical device to 121 °C (249 °F) for 15–20 minutes. Ultrasonic cleaning, UV light, and chemical wipe-down or immersion can also be used for different types of devices.

Medical devices used in operating rooms, ICUs, isolation rooms, biological analysis labs, and other high-contamination-risk areas have negative pressure (constant exhaust) in the rooms, maintain strict cleaning protocols, require equipment with no fans, and often drape equipment in protective plastic.[29]

UVC irradiation is a noncontact, nonchemical solution that can be used across a range of instruments. Radiation in the UVC range prevents biofilm formation by deactivating the DNA in bacteria, viruses, and other microbes. Preventing biofilm formation prevents larger organisms from attaching themselves to the instrument and eventually rendering it inoperable.[30]

History

Biofouling, especially of ships, has been a problem for as long as humans have been sailing the oceans.[31]

The earliest attestations of attempts to counter fouling, and thus also the earliest attestation of knowledge if it, is the use of pitch and copper plating as anti-fouling solutions that were attributed to ancient seafaring nations, such as the Phoenicians and Carthaginians (1500- 300BC). Wax, tar and asphaltum have been used since early times.[31] An Aramaic record dating from 412 B.C. tells of a ship's bottom being coated with a mixture of arsenic, oil and sulphur.[32] In Deipnosophistae, Athenaeus described the anti-fouling efforts taken in the construction of the great ship of Hieron of Syracuse (died 467 BC).[33]

A recorded explanation by Plutarch of the impact fouling had on ship speed goes as follows: "when weeds, ooze, and filth stick upon its sides, the stroke of the ship is more obtuse and weak; and the water, coming upon this clammy matter, doth not so easily part from it; and this is the reason why they usually calk their ships."[34]

Before the 18th century, various anti-fouling techniques were used, with three main substances employed: "White stuff", a mixture of train oil (Whale oil), rosin and sulfur; "Black stuff", a mixture of tar and pitch; and "Brown stuff", which was simply sulfur added to Black stuff.[35] In many of these cases, the purpose of these treatments is ambiguous. There is dispute whether many of these treatments were actual anti-fouling techniques, or whether, when they were used in conjunction with lead and wood sheathing, they were simply intended to combat wood-boring shipworms.

Ships brought ashore on the Torres Strait and careened in preparation for cleaning the hull

In 1708, Charles Perry suggested copper sheathing explicitly as an anti-fouling device but the first experiments were not made until 1761 with the sheathing of HMS Alarm, after which the bottoms and sides of several ships' keels and false keels were sheathed with copper plates.[31]

The copper performed well in protecting the hull from invasion by worm, and in preventing the growth of weed, for when in contact with water, the copper produced a poisonous film, composed mainly of oxychloride, that deterred these marine creatures. Furthermore, as this film was slightly soluble, it gradually washed away, leaving no way for marine life to attach itself to the ship.[citation needed] From about 1770, the Royal Navy set about coppering the bottoms of the entire fleet and continued to the end of the use of wooden ships. The process was so successful that the term copper-bottomed came to mean something that was highly dependable or risk free.

With the rise of iron hulls in the 19th century, copper sheathing could no longer be used due to its galvanic corrosive interaction with iron. Anti-fouling paints were tried, and in 1860, the first practical paint to gain widespread use was introduced in Liverpool and was referred to as "McIness" hot plastic paint.[31] These treatments had a short service life, were expensive, and relatively ineffective by modern standards.[1]

By the mid-twentieth century, copper oxide-based paints could keep a ship out of drydock for as much as 18 months, or as little as 12 in tropical waters.[31] The shorter service life was due to rapid leaching of the toxicant, and chemical conversion into less toxic salts, which accumulated as a crust that would inhibit further leaching of active cuprous oxide from the layer under the crust.[36]

The 1960s brought a breakthrough, with self-polishing paints that slowly hydrolyze, slowly releasing toxins. These paints employed organotin chemistry ("tin-based") biotoxins such as tributyltin oxide (TBT) and were effective for up to four years. These biotoxins were subsequently banned by the International Maritime Organization when they were found to be very toxic to diverse organisms.[37][38] TBT in particular has been described as the most toxic pollutant ever deliberately released in the ocean.[24]

As an alternative to organotin toxins, there has been renewed interest in copper as the active agent in ablative or self polishing paints, with reported service lives up to 5 years; yet also other methods that do not involve coatings. Modern adhesives permit application of copper alloys to steel hulls without creating galvanic corrosion. However, copper alone is not impervious to diatom and algae fouling. Some studies indicate that copper may also present an unacceptable environmental impact.[39]

Study of biofouling began in the early 19th century with Davy's experiments linking the effectiveness of copper to its solute rate.[31] In the 1930s microbiologist Claude ZoBell showed that the attachment of organisms is preceded by the adsorption of organic compounds now referred to as extracellular polymeric substances.[40][41]

One trend of research is the study of the relationship between wettability and anti-fouling effectiveness. Another trend is the study of living organisms as the inspiration for new functional materials. For example, the mechanisms used by marine animals to inhibit biofouling on their skin.[42]

Materials research into superior antifouling surfaces for fluidized bed reactors suggest that low wettability plastics such as polyvinyl chloride (PVC), high-density polyethylene and polymethylmethacrylate ("plexiglas") demonstrate a high correlation between their resistance to bacterial adhesion and their hydrophobicity.[43]

A study of the biotoxins used by organisms has revealed several effective compounds, some of which are more powerful than synthetic compounds. Bufalin, a bufotoxin, was found to be over 100 times as potent as TBT, and over 6,000 times more effective in anti-settlement activity against barnacles.[44]

One approach to antifouling entails coating surfaces with polyethylene glycol (PEG).[45] Growing chains of PEG on surfaces is challenging. The resolution to this problem may come from understanding the mechanisms by which mussels adhere to solid surfaces in marine environments. Mussels utilize adhesive proteins, or MAPs.[46] The service life of PEG coatings is also doubtful.

See also

References

  1. 1.0 1.1 1.2 1.3 1.4 1.5 Yebra, Diego Meseguer; Kiil, Søren; Dam-Johansen, Kim (July 2004). "Antifouling technology—past, present and future steps towards efficient and environmentally friendly antifouling coatings". Progress in Organic Coatings 50 (2): 75–104. doi:10.1016/j.porgcoat.2003.06.001. 
  2. 2.0 2.1 2.2 Vladkova, T. (2009), "Surface Modification Approach to Control Biofouling", Marine and Industrial Biofouling, Springer Series on Biofilms 4 (1): 135–163, doi:10.1007/978-3-540-69796-1_7, ISBN 978-3-540-69794-7 
  3. 3.0 3.1 L.D. Chambers (2006). "Modern approaches to marine antifouling coatings". Surface and Coatings Technology 6 (4): 3642–3652. doi:10.1016/j.surfcoat.2006.08.129. https://eprints.soton.ac.uk/43767/1/our_anti-fouling.pdf. 
  4. 4.0 4.1 Vietti, Peter (4 June 2009), New hull coatings for Navy ships cut fuel use, protect environment, Office of Naval Research, http://www.eurekalert.org/pub_releases/2009-06/oonr-nhc060409.php, retrieved 21 May 2012 
  5. 5.0 5.1 5.2 5.3 Vietti, P. (Fall 2009). "New Hull Coatings Cut Fuel Use, Protect Environment". Currents: 36–38. http://www.enviro-navair.navy.mil/currents/fall2009/Fall09_New_Hull_Coatings.pdf. Retrieved 6 June 2011. 
  6. 6.0 6.1 Salta, M. (2008). "Designing biomimetic antifouling surfaces". Philosophical Transactions of the Royal Society 368 (1929): 4729–4754. doi:10.1098/rsta.2010.0195. PMID 20855318. Bibcode2010RSPTA.368.4729S. 
  7. Almeida, E; Diamantino, Teresa C.; De Sousa, Orlando (2007), "Marine paints: The particular case of antifouling paints", Progress in Organic Coatings 59 (1): 2–20, doi:10.1016/j.porgcoat.2007.01.017 
  8. 8.0 8.1 8.2 Stanczak, Marianne (March 2004), Biofouling: It's Not Just Barnacles Anymore, http://www.csa.com/discoveryguides/biofoul/overview.php, retrieved 21 May 2012 
  9. Rouhi, A. Maureen (27 April 1998). "The Squeeze On Tributyltins: Former EPA adviser voices doubts over regulations restricting antifouling paints". Chemical & Engineering News Archive 76 (17): 41–42. doi:10.1021/cen-v076n017.p041. 
  10. Woods Hole Oceanographic Institute (1952), "The Effects of Fouling", Marine Fouling and its Prevention, United States department of the Navy, Bureau of Ships, https://darchive.mblwhoilibrary.org/bitstream/handle/1912/191/chapter%201.pdf?sequence=8 
  11. 11.0 11.1 "Sample records for oil-water emulsified fuel". https://worldwidescience.org/topicpages/o/oil-water+emulsified+fuel.html. 
  12. Capelletti, Raquel Vannucci; Moraes, Ângela Maria (2015-08-07). "Waterborne microorganisms and biofilms related to hospital infections: strategies for prevention and control in healthcare facilities". Journal of Water and Health 14 (1): 52–67. doi:10.2166/wh.2015.037. ISSN 1477-8920. https://doi.org/10.2166/wh.2015.037. 
  13. Babič, Monika; Gunde-Cimerman, Nina; Vargha, Márta; Tischner, Zsófia; Magyar, Donát; Veríssimo, Cristina; Sabino, Raquel; Viegas, Carla et al. (13 June 2017). "Fungal Contaminants in Drinking Water Regulation? A Tale of Ecology, Exposure, Purification and Clinical Relevance". International Journal of Environmental Research and Public Health 14 (6): 636. doi:10.3390/ijerph14060636. 
  14. Fitridge, Isla; Dempster, Tim; Guenther, Jana; de Nys, Rocky (9 July 2012). "The impact and control of biofouling in marine aquaculture: a review". Biofouling 28 (7): 649–669. doi:10.1080/08927014.2012.700478. PMID 22775076. 
  15. Sievers, Michael; Dempster, Tim; Fitridge, Isla; Keough, Michael J. (8 January 2014). "Monitoring biofouling communities could reduce impacts to mussel aquaculture by allowing synchronisation of husbandry techniques with peaks in settlement". Biofouling 30 (2): 203–212. doi:10.1080/08927014.2013.856888. PMID 24401014. 
  16. Pit, Josiah H.; Southgate, Paul C. (2003). "Fouling and predation; how do they affect growth and survival of the blacklip pearl oyster, Pinctada margaritifera, during nursery culture?". Aquaculture International 11 (6): 545–555. doi:10.1023/b:aqui.0000013310.17400.97. 
  17. Sievers, Michael; Fitridge, Isla; Dempster, Tim; Keough, Michael J. (20 December 2012). "Biofouling leads to reduced shell growth and flesh weight in the cultured mussel". Biofouling 29 (1): 97–107. doi:10.1080/08927014.2012.749869. PMID 23256892. https://figshare.com/articles/journal_contribution/825501. 
  18. Sievers, Michael; Fitridge, Isla; Bui, Samantha; Dempster, Tim (6 September 2017). "To treat or not to treat: a quantitative review of the effect of biofouling and control methods in shellfish aquaculture to evaluate the necessity of removal". Biofouling 33 (9): 755–767. doi:10.1080/08927014.2017.1361937. PMID 28876130. https://figshare.com/articles/journal_contribution/5379502. 
  19. Venugopalan, Hari (July 2016). "Photonic Frontiers: LEDs - UVC LEDs reduce marine biofouling". Laser Focus World 52 (7): 28–31. http://www.laserfocusworld.com/articles/print/volume-52/issue-07/features/photonic-frontiers-leds-uvc-leds-reduce-marine-biofouling.html. 
  20. Gang Cheng (2 June 2010), "Integrated Antimicrobial and Nonfouling Hydrogels to Inhibit the Growth of Planktonic Bacterial Cells and Keep the Surface Clean", Langmuir 26 (13): 10425–10428, doi:10.1021/la101542m, PMID 20518560 
  21. Brady, R.F. (1 January 2000), "Clean Hulls Without Poisons: Devising and Testing Nontoxic Marine Coatings", Journal of Coatings Technology 72 (900): 44–56, doi:10.1007/BF02698394, http://www.highbeam.com/doc/1G1-59245245.html, retrieved 22 May 2012 
  22. Krishnan, S; Weinman, Craig J.; Ober, Christopher K. (2008), "Advances in polymers for anti-biofouling surfaces", Journal of Materials Chemistry 12 (29): 3405–3413, doi:10.1039/B801491D 
  23. Jiang, S.; Cao, Z. (2010), "Ultralow-Fouling, Functionalizable, and Hydrolyzable Zwitterionic Materials and Their Derivatives for Biological Applications", Advanced Materials 22 (9): 920–932, doi:10.1002/adma.200901407, PMID 20217815, Bibcode2010AdM....22..920J 
  24. 24.0 24.1 Evans, S.M.; Leksono, T.; McKinnell, P.D. (January 1995). "Tributyltin pollution: A diminishing problem following legislation limiting the use of TBT-based anti-fouling paints". Marine Pollution Bulletin 30 (1): 14–21. doi:10.1016/0025-326X(94)00181-8. Bibcode1995MarPB..30...14E. 
  25. "Anti-fouling Systems". http://www.imo.org/en/OurWork/Environment/Anti-foulingSystems/Pages/Default.aspx. 
  26. Lee, TJ; Nakano, K; Matsumara, M (2001). "Ultrasonic irradiation for blue-green algae bloom control". Environ Technol 22 (4): 383–90. doi:10.1080/09593332208618270. PMID 11329801. 
  27. Walch, M.; Mazzola, M.; Grothaus, M. (2000) (pdf), Feasibility Demonstration of a Pulsed Acoustic Device for Inhibition of Biofouling in Seawater Piping, Bethesda, MD: Naval Surface Warfare Center Carderock Div., NSWCCD-TR-2000/04, http://www.dtic.mil/cgi-bin/GetTRDoc?Location=U2&doc=GetTRDoc.pdf&AD=ADA376166, retrieved 21 May 2012 
  28. Sommerville, David C. (September 1986), "Development of a Site Specific Biofouling Control Program for the Diablo Canyon Power Plant", Oceans 86 Proceedings, IEEE Conference Publications, pp. 227–231, doi:10.1109/OCEANS.1986.1160543 
  29. Andersen, Bjørg Marit (2019). "Operation Department: Infection Control". Prevention and Control of Infections in Hospitals. pp. 453–489. doi:10.1007/978-3-319-99921-0_35. ISBN 978-3-319-99920-3. 
  30. Hari Venugopalan, Photonic Frontiers: LEDs - UVC LEDs reduce marine biofouling, Laser Focus World (July 2016) pp. 28–31 StackPath
  31. 31.0 31.1 31.2 31.3 31.4 31.5 Woods Hole Oceanographic Institute (1952), "The History and Prevention of Foulng", Marine Fouling and its Prevention, United States department of the Navy, Bureau of Ships, https://darchive.mblwhoilibrary.org/bitstream/handle/1912/191/chapter%2011.pdf?sequence=20 
  32. Culver, Henry E.; Grant, Gordon (1992), The Book of Old Ships, Dover Publications, ISBN 978-0486273327 
  33. Athenaeus of Naucratis, The deipnosophists, or, Banquet of the learned of Athenæus, Volume I, Book V, Chapter 40 ff.
  34. Plutarch (February 2002), "Essays and Miscellanies", The Complete Works of Plutarch, Volume 3, http://www.gutenberg.org/files/3052/3052-h/3052-h.htm 
  35. Lavery, Brian (2000), The Arming and Fitting of English Ships of War 1600-1815, Conway Maritime Press, ISBN 978-0-85177-451-0 
  36. Dowd, Theodore (1983). An Assessment of Ablative Organotin Antifouling (AF) Coatings. Template:DTIC. 
  37. Focus on IMO - Anti-fouling systems, International Maritime Organization, 2002, http://www.imo.org/blast/blastDataHelper.asp?data_id=7986&filename=FOULING2003.pdf, retrieved 22 May 2012 
  38. Gajda, M.; Jancso, A. (2010), "Organotins, formation, use, speciation and toxicology", Metal Ions in Life Sciences (Cambridge: RSC publishing) 7, Organometallics in environment and toxicology: 111–51, doi:10.1039/9781849730822-00111, ISBN 9781847551771, PMID 20877806 
  39. Swain, Geoffrey (1999). "Redefining Antifouling Coatings". Journal of Protective Coatings & Linings 16 (9): 26–35. OCLC 210981215. http://www.paintsquare.com/library/articles/redefining_antifouling_coatings.pdf. 
  40. Shor, Elizabeth Noble (1978), Scripps Institution of Oceanography: Probing the Oceans 1936 to 1976, San Diego, Calif: Tofua Press, p. 225, http://publishing.cdlib.org/ucpressebooks/view?docId=kt109nc2cj, retrieved 21 May 2012 
  41. Lappin-Scott, Hilary M. (2000), "Claude E. Zobell – his life and contributions to biofilm microbiology", Microbial Biosystems: New Frontiers, Proceedings of the 8th International Symposium on Microbial Ecology, Halifax, Canada: Society for Microbial Ecology, ISBN 9780968676332, http://plato.acadiau.ca/isme/Symposium03/lappin-scott.PDF, retrieved 23 May 2012 
  42. Carman, Michelle L.; Estes, Thomas G.; Feinberg, Adam W.; Schumacher, James F.; Wilkerson, Wade; Wilson, Leslie H.; Callow, Maureen E.; Callow, James A. et al. (January 2006). "Engineered antifouling microtopographies – correlating wettability with cell attachment". Biofouling 22 (1): 11–21. doi:10.1080/08927010500484854. PMID 16551557. 
  43. R. Oliveira (2001), "Hydrophobicity in Bacterial Adhesion", Biofilm community interactions: chance or necessity?, BioLine, ISBN 978-0952043294, http://repositorium.sdum.uminho.pt/bitstream/1822/6706/1/BIOCLUB2%255B1%255D.pdf 
  44. Omae, Iwao (2003), "General Aspects of Tin-Free Antifouling Paints", Chemical Reviews 103 (9): 3431–3448, doi:10.1021/cr030669z, PMID 12964877, http://web.centre.edu/workmanj/che%20454%20stuff/antifouling.pdf, retrieved 23 May 2012 
  45. Dalsin, J.; Messersmith, P. (2005). "Bioinspired antifouling polymers". Materials Today 8 (9): 38–46. doi:10.1016/S1369-7021(05)71079-8. 
  46. Taylor, S. (1994). "trans-2,3-cis-3,4-Dihydroxyproline, a New Naturally Occurring Amino Acid, Is the Sixth Residue in the Tandemly Repeated Consensus Decapeptides of an Adhesive Protein from Mytilus edulis". J. Am. Chem. Soc. 116 (23): 10803–10804. doi:10.1021/ja00102a063. 

Further reading