Chemistry:Samarium compounds

From HandWiki

Samarium compounds are compounds formed by the lanthanide metal samarium (Sm). In these compounds, samarium generally exhibits the +3 oxidation state, such as SmCl3, Sm(NO3)3 and Sm(C2O4)3. Compounds with samarium in the +2 oxidation state are also known, for example SmI2.

Properties of samarium compounds

Formula color symmetry space group No Pearson symbol a (pm) b (pm) c (pm) Z density,
g/cm3
Sm silvery trigonal[1] R3m 166 hR9 362.9 362.9 2621.3 9 7.52
Sm silvery hexagonal[1] P63/mmc 194 hP4 362 362 1168 4 7.54
Sm silvery tetragonal[2] I4/mmm 139 tI2 240.2 240.2 423.1 2 20.46
SmO golden cubic[3] Fm3m 225 cF8 494.3 494.3 494.3 4 9.15
Sm2O3 trigonal[4] P3m1 164 hP5 377.8 377.8 594 1 7.89
Sm2O3 monoclinic[4] C2/m 12 mS30 1418 362.4 885.5 6 7.76
Sm2O3 cubic[5] Ia3 206 cI80 1093 1093 1093 16 7.1
SmH2 cubic[6] Fm3m 225 cF12 537.73 537.73 537.73 4 6.51
SmH3 hexagonal[7] P3c1 165 hP24 377.1 377.1 667.2 6
Sm2B5 gray monoclinic[8] P21/c 14 mP28 717.9 718 720.5 4 6.49
SmB2 hexagonal[9] P6/mmm 191 hP3 331 331 401.9 1 7.49
SmB4 tetragonal[10] P4/mbm 127 tP20 717.9 717.9 406.7 4 6.14
SmB6 cubic[11] Pm3m 221 cP7 413.4 413.4 413.4 1 5.06
SmB66 cubic[12] Fm3c 226 cF1936 2348.7 2348.7 2348.7 24 2.66
Sm2C3 cubic[13] I43d 220 cI40 839.89 839.89 839.89 8 7.55
SmC2 tetragonal[13] I4/mmm 139 tI6 377 377 633.1 2 6.44
SmF2 purple[14] cubic[15] Fm3m 225 cF12 587.1 587.1 587.1 4 6.18
SmF3 white[14] orthorhombic[15] Pnma 62 oP16 667.22 705.85 440.43 4 6.64
SmCl2 brown[14] orthorhombic[16] Pnma 62 oP12 756.28 450.77 901.09 4 4.79
SmCl3 yellow[14] hexagonal[15] P63/m 176 hP8 737.33 737.33 416.84 2 4.35
SmBr2 brown[14] orthorhombic[17] Pnma 62 oP12 797.7 475.4 950.6 4 5.72
SmBr3 yellow[14] orthorhombic[18] Cmcm 63 oS16 404 1265 908 2 5.58
SmI2 green[14] monoclinic P21/c 14 mP12
SmI3 orange[14] trigonal[19] R3 63 hR24 749 749 2080 6 5.24
SmN cubic[20] Fm3m 225 cF8 357 357 357 4 8.48
SmP cubic[21] Fm3m 225 cF8 576 576 576 4 6.3
SmAs cubic[22] Fm3m 225 cF8 591.5 591.5 591.5 4 7.23

Chalcogenides

Oxides

Samarium sesquioxide

The most stable oxide of samarium is the sesquioxide Sm2O3. Like many samarium compounds, it exists in several crystalline phases. The trigonal form is obtained by slow cooling from the melt. The melting point of Sm2O3 is high (2345 °C), so it is usually melted not by direct heating, but with induction heating, through a radio-frequency coil. Sm2O3 crystals of monoclinic symmetry can be grown by the flame fusion method (Verneuil process) from Sm2O3 powder, that yields cylindrical boules up to several centimeters long and about one centimeter in diameter. The boules are transparent when pure and defect-free and are orange otherwise. Heating the metastable trigonal Sm2O3 to 1900 °C converts it to the more stable monoclinic phase.[4] Cubic Sm2O3 has also been described.[5]

Samarium is one of the few lanthanides that form a monoxide, SmO. This lustrous golden-yellow compound was obtained by reducing Sm2O3 with samarium metal at high temperature (1000 °C) and pressure above 50 kbar; lowering the pressure resulted in incomplete reaction. SmO has cubic rock-salt lattice structure.[3][23]

Other chalcogenides

Samarium forms a trivalent sulfide, selenide and telluride. Divalent chalcogenides SmS, SmSe and SmTe with cubic rock-salt crystal structure are also known. They are remarkable by converting from semiconducting to metallic state at room temperature upon application of pressure. Whereas the transition is continuous and occurs at about 20–30 kbar in SmSe and SmTe, it is abrupt in SmS and requires only 6.5 kbar. This effect results in spectacular color change in SmS from black to golden yellow when its crystals of films are scratched or polished. The transition does not change lattice symmetry, but there is a sharp decrease (~15%) in the crystal volume.[24] It shows hysteresis, that is when the pressure is released, SmS returns to the semiconducting state at much lower pressure of about 0.4 kbar.[25][26]

Halides

Samarium trichloride hexahydrate

Samarium metal reacts with all the halogens, forming trihalides:[27]

2 Sm (s) + 3 X2 (g) → 2 SmX3 (s) (X = F, Cl, Br or I)

Their further reduction with samarium, lithium or sodium metals at elevated temperatures (about 700–900 °C) yields dihalides.[16] The diiodide can also be prepared by heating SmI3, or by reacting the metal with 1,2-diiodoethane in anhydrous tetrahydrofuran at room temperature:[28]

Sm (s) + ICH2-CH2I → SmI2 + CH2=CH2.

In addition to dihalides, the reduction also produces many non-stoichiometric samarium halides with a well-defined crystal structure, such as Sm3F7, Sm14F33, Sm27F64,[15] Sm11Br24, Sm5Br11 and Sm6Br13.[29]

As reflected in the table above, samarium halides change their crystal structures when one type of halide atom is substituted for another, which is an uncommon behavior for most elements (e.g. actinides). Many halides have two major crystal phases for one composition, one being significantly more stable and another being metastable. The latter is formed upon compression or heating, followed by quenching to ambient conditions. For example, compressing the usual monoclinic samarium diiodide and releasing the pressure results in a PbCl2-type orthorhombic structure (density 5.90 g/cm3),[30] and similar treatment results in a new phase of samarium triiodide (density 5.97 g/cm3).[31]

Borides

Sintering powders of samarium oxide and boron, in vacuum, yields a powder containing several samarium boride phases, and their volume ratio can be controlled through the mixing proportion.[32] The powder can be converted into larger crystals of a certain samarium boride using arc melting or zone melting techniques, relying on the different melting/crystallization temperature of SmB6 (2580 °C), SmB4 (about 2300 °C) and SmB66 (2150 °C). All these materials are hard, brittle, dark-gray solids with the hardness increasing with the boron content.[11] Samarium diboride is too volatile to be produced with these methods and requires high pressure (about 65 kbar) and low temperatures between 1140 and 1240 °C to stabilize its growth. Increasing the temperature results in the preferential formations of SmB6.[9]

Samarium hexaboride

Samarium hexaboride is a typical intermediate-valence compound where samarium is present both as Sm2+ and Sm3+ ions at the ratio 3:7.[32] It belongs to a class of Kondo insulators, that is at high temperatures (above 50 K), its properties are typical of a Kondo metal, with metallic electrical conductivity characterized by strong electron scattering, whereas at low temperatures, it behaves as a non-magnetic insulator with a narrow band gap of about 4–14 meV.[33] The cooling-induced metal-insulator transition in SmB6 is accompanied by a sharp increase in the thermal conductivity, peaking at about 15 K. The reason for this increase is that electrons themselves do not contribute to the thermal conductivity at low temperatures, which is dominated by phonons, but the decrease in electron concentration reduced the rate of electron-phonon scattering.[34]

New research seems to show that it may be a topological insulator.[35][36][37]

Other inorganic compounds

Samarium sulfate, Sm2(SO4)3

Samarium carbides are prepared by melting a graphite-metal mixture in an inert atmosphere. After the synthesis, they are unstable in air and are studied also under inert atmosphere.[13] Samarium monophosphide SmP is a semiconductor with the bandgap of 1.10 eV, the same as in silicon, and high electrical conductivity of n-type. It can be prepared by annealing at 1100 °C an evacuated quartz ampoule containing mixed powders of phosphorus and samarium. Phosphorus is highly volatile at high temperatures and may explode, thus the heating rate has to be kept well below 1 °C/min.[21] Similar procedure is adopted for the monarsenide SmAs, but the synthesis temperature is higher at 1800 °C.[22]

Numerous crystalline binary compounds are known for samarium and one of the group-14, 15 or 16 element X, where X is Si, Ge, Sn, Pb, Sb or Te, and metallic alloys of samarium form another large group. They are all prepared by annealing mixed powders of the corresponding elements. Many of the resulting compounds are non-stoichiometric and have nominal compositions SmaXb, where the b/a ratio varies between 0.5 and 3.[38][39][40]

Organosamarium compounds

Samarium forms a cyclopentadienide Sm(C
5
H
5
)
3
and its chloroderivatives Sm(C
5
H
5
)
2
Cl
and Sm(C
5
H
5
)Cl
2
. They are prepared by reacting samarium trichloride with NaC
5
H
5
in tetrahydrofuran. Contrary to cyclopentadienides of most other lanthanides, in Sm(C
5
H
5
)
3
some C
5
H
5
rings bridge each other by forming ring vertexes η1 or edges η2 toward another neighboring samarium, thus creating polymeric chains.[41] The chloroderivative Sm(C
5
H
5
)
2
Cl
has a dimer structure, which is more accurately expressed as (η(
5
)–C
5
H
5
)
2
Sm(–Cl)
2
(η(
5
)–C
5
H
5
)
2
. There, the chlorine bridges can be replaced, for instance, by iodine, hydrogen or nitrogen atoms or by CN groups.[42]

The (C
5
H
5
) ion in samarium cyclopentadienides can be replaced by the indenide (C
9
H
7
) or cyclooctatetraenide (C
8
H
8
)2− ring, resulting in Sm(C
9
H
7
)
3
or KSm(η(
8
)–C
8
H
8
)
2
. The latter compound has a structure similar to uranocene. There is also a cyclopentadienide of divalent samarium, Sm(C
5
H
5
)
2− a solid that sublimates at about 85 °C. Contrary to ferrocene, the C
5
H
5
rings in Sm(C
5
H
5
)
2
are not parallel but are tilted by 40°.[42][43]

A metathesis reaction in tetrahydrofuran or ether gives alkyls and aryls of samarium:[42]

SmCl
3
+ 3LiR → SmR
3
+ 3LiCl
Sm(OR)
3
+ 3LiCH(SiMe
3
)
2
→ Sm{CH(SiMe
3
)
2
}
3
+ 3LiOR

Here R is a hydrocarbon group and Me = methyl.

See also

References

  1. 1.0 1.1 Shi, N.; Fort, D. (1985). "Preparation of samarium in the double hexagonal close packed form". Journal of the Less Common Metals 113 (2): 21. doi:10.1016/0022-5088(85)90294-2. 
  2. Vohra, Y.; Akella, Jagannadham; Weir, Sam; Smith, Gordon S. (1991). "A new ultra-high pressure phase in samarium". Physics Letters A 158 (1–2): 89. doi:10.1016/0375-9601(91)90346-A. Bibcode1991PhLA..158...89V. https://zenodo.org/record/1258493. 
  3. 3.0 3.1 Leger, J.; Yacoubi, N.; Loriers, J. (1981). "Synthesis of rare earth monoxides". Journal of Solid State Chemistry 36 (3): 261. doi:10.1016/0022-4596(81)90436-9. Bibcode1981JSSCh..36..261L. 
  4. 4.0 4.1 4.2 Gouteron, J.; Michel, D.; Lejus, A. M.; Zarembowitch, J. (1981). "Raman spectra of lanthanide sesquioxide single crystals: Correlation between A and B-type structures". Journal of Solid State Chemistry 38 (3): 288. doi:10.1016/0022-4596(81)90058-X. Bibcode1981JSSCh..38..288G. 
  5. 5.0 5.1 Taylor D. (1984). "none". Br. Ceram. Trans. J. 83: 92–98. 
  6. Daou, J.; Vajda, P.; Burger, J. (1989). "Low temperature thermal expansion in SmH2+x". Solid State Communications 71 (12): 1145. doi:10.1016/0038-1098(89)90728-X. Bibcode1989SSCom..71.1145D. 
  7. Dolukhanyan, S. (1997). "Synthesis of novel compounds by hydrogen combustion". Journal of Alloys and Compounds 253–254: 10. doi:10.1016/S0925-8388(96)03071-X. 
  8. Zavalii, L. V.; Kuz'ma, Yu. B.; Mikhalenko, S. I. (1990). "Sm2B5 boride and its structure". Soviet Powder Metallurgy and Metal Ceramics 29 (6): 471. doi:10.1007/BF00795346. 
  9. 9.0 9.1 Cannon, J.; Cannon, D.; Tracyhall, H. (1977). "High pressure syntheses of SmB2 and GdB12". Journal of the Less Common Metals 56: 83. doi:10.1016/0022-5088(77)90221-1. 
  10. Etourneau, J.; Mercurio, J.; Berrada, A.; Hagenmuller, P.; Georges, R.; Bourezg, R.; Gianduzzo, J. (1979). "The magnetic and electrical properties of some rare earth tetraborides". Journal of the Less Common Metals 67 (2): 531. doi:10.1016/0022-5088(79)90038-9. 
  11. 11.0 11.1 Solovyev, G. I.; Spear, K. E. (1972). "Phase Behavior in the Sm-B System". Journal of the American Ceramic Society 55 (9): 475. doi:10.1111/j.1151-2916.1972.tb11344.x. 
  12. Schwetz, K.; Ettmayer, P.; Kieffer, R.; Lipp, A. (1972). "Über die Hektoboridphasen der Lanthaniden und Aktiniden". Journal of the Less Common Metals 26: 99. doi:10.1016/0022-5088(72)90012-4. 
  13. 13.0 13.1 13.2 Spedding, F. H.; Gschneidner, K.; Daane, A. H. (1958). "The Crystal Structures of Some of the Rare Earth Carbides". Journal of the American Chemical Society 80 (17): 4499. doi:10.1021/ja01550a017. 
  14. 14.0 14.1 14.2 14.3 14.4 14.5 14.6 14.7 Greenwood, p. 1241
  15. 15.0 15.1 15.2 15.3 Greis, O. (1978). "Über neue Verbindungen im system SmF2_SmF3". Journal of Solid State Chemistry 24 (2): 227. doi:10.1016/0022-4596(78)90013-0. Bibcode1978JSSCh..24..227G. 
  16. 16.0 16.1 Meyer, G.; Schleid, T. (1986). "The metallothermic reduction of several rare-earth trichlorides with lithium and sodium". Journal of the Less Common Metals 116: 187. doi:10.1016/0022-5088(86)90228-6. 
  17. Bärnighausen, H. (1973). "none". Rev. Chim. Miner 10: 77–92. 
  18. Zachariasen, W. H. (1948). "Crystal chemical studies of the 5f-series of elements. I. New structure types". Acta Crystallographica 1 (5): 265. doi:10.1107/S0365110X48000703. 
  19. Asprey, L. B.; Keenan, T. K.; Kruse, F. H. (1964). "Preparation and Crystal Data for Lanthanide and Actinide Triiodides". Inorganic Chemistry 3 (8): 1137. doi:10.1021/ic50018a015. https://digital.library.unt.edu/ark:/67531/metadc867868/m2/1/high_res_d/4067674.pdf. 
  20. Brown, R.; Clark, N. J. (1974). "Composition limits and vaporization behaviour of rare earth nitrides". Journal of Inorganic and Nuclear Chemistry 36 (11): 2507. doi:10.1016/0022-1902(74)80462-8. 
  21. 21.0 21.1 Meng, J.; Ren, Yufang (1991). "Studies on the electrical properties of rare earth monophosphides". Journal of Solid State Chemistry 95 (2): 346. doi:10.1016/0022-4596(91)90115-X. Bibcode1991JSSCh..95..346M. 
  22. 22.0 22.1 Beeken, R.; Schweitzer, J. (1981). "Intermediate valence in alloys of SmSe with SmAs". Physical Review B 23 (8): 3620. doi:10.1103/PhysRevB.23.3620. Bibcode1981PhRvB..23.3620B. 
  23. Greenwood, p. 1239
  24. Beaurepaire, Eric (Ed.) Magnetism: a synchrotron radiation approach, Springer, 2006 ISBN:3-540-33241-3 p. 393
  25. Emsley, John (2001). "Samarium". Nature's Building Blocks: An A–Z Guide to the Elements. Oxford, England, UK: Oxford University Press. pp. 371–374. ISBN 0-19-850340-7. https://books.google.com/books?id=j-Xu07p3cKwC&pg=PA371. 
  26. Jayaraman, A.; Narayanamurti, V.; Bucher, E.; Maines, R. (1970). "Continuous and Discontinuous Semiconductor-Metal Transition in Samarium Monochalcogenides Under Pressure". Physical Review Letters 25 (20): 1430. doi:10.1103/PhysRevLett.25.1430. Bibcode1970PhRvL..25.1430J. 
  27. Greenwood, pp. 1236, 1241
  28. Greenwood, p. 1240
  29. Baernighausen, H.; Haschke, John M. (1978). "Compositions and crystal structures of the intermediate phases in the samarium-bromine system". Inorganic Chemistry 17: 18. doi:10.1021/ic50179a005. 
  30. Beck, H. P. (1979). "Hochdruckmodifikationen der Diiodide von Sr., Sm und Eu. Eine neue PbCl2-Variante?". Zeitschrift für anorganische und allgemeine Chemie 459: 81. doi:10.1002/zaac.19794590108. 
  31. Beck, H. P.; Gladrow, E. (1979). "Zur Hochdruckpolymorphie der Seltenerd-Trihalogenide". Zeitschrift für anorganische und allgemeine Chemie 453: 79. doi:10.1002/zaac.19794530610. 
  32. 32.0 32.1 Nickerson, J.; White, R.; Lee, K.; Bachmann, R.; Geballe, T.; Hull, G. (1971). "Physical Properties of SmB6". Physical Review B 3 (6): 2030. doi:10.1103/PhysRevB.3.2030. Bibcode1971PhRvB...3.2030N. 
  33. Nyhus, P.; Cooper, S.; Fisk, Z.; Sarrao, J. (1995). "Light scattering from gap excitations and bound states in SmB6". Physical Review B 52 (20): 14308–14311. doi:10.1103/PhysRevB.52.R14308. PMID 9980746. Bibcode1995PhRvB..5214308N. 
  34. Sera, M.; Kobayashi, S.; Hiroi, M.; Kobayashi, N.; Kunii, S. (1996). "Thermal conductivity of RB6 (R=Ce, Pr, Nd, Sm, Gd) single crystals". Physical Review B 54 (8): R5207–R5210. doi:10.1103/PhysRevB.54.R5207. PMID 9986570. Bibcode1996PhRvB..54.5207S. 
  35. Botimer, J.; Kim; Thomas; Grant; Fisk; Jing Xia (2013). "Robust Surface Hall Effect and Nonlocal Transport in SmB6: Indication for an Ideal Topological Insulator". Scientific Reports 3 (3150): 3150. doi:10.1038/srep03150. PMID 24193196. Bibcode2013NatSR...3E3150K. 
  36. Zhang, Xiaohang; Butch; Syers; Ziemak; Greene; Paglione (2013). "Hybridization, Correlation, and In-Gap States in the Kondo Insulator SmB6". Physical Review X 3 (1): 011011. doi:10.1103/PhysRevX.3.011011. Bibcode2013PhRvX...3a1011Z. 
  37. Wolgast, Steven; Kurdak, Cagliyan; Sun, Kai et al. (2012). "Low-temperature surface conduction in the Kondo insulator SmB6". Physical Review B 88 (18): 180405. doi:10.1103/PhysRevB.88.180405. Bibcode2013PhRvB..88r0405W. 
  38. Gladyshevskii, E. I.; Kripyakevich, P. I. (1965). "Monosilicides of rare earth metals and their crystal structures". Journal of Structural Chemistry 5 (6): 789. doi:10.1007/BF00744231. 
  39. Smith, G. S.; Tharp, A. G.; Johnson, W. (1967). "Rare earth–germanium and –silicon compounds at 5:4 and 5:3 compositions". Acta Crystallographica 22 (6): 940. doi:10.1107/S0365110X67001902. 
  40. Yarembash, E. I.; Tyurin, E. G.; Reshchikova, A. A. et al. (1971). "none". Inorg. Mater. 7: 661–665. 
  41. Greenwood, p. 1248
  42. 42.0 42.1 42.2 Greenwood, p. 1249
  43. Evans, William J.; Hughes, Laura A.; Hanusa, Timothy P. (1986). "Synthesis and x-ray crystal structure of bis(pentamethylcyclopentadienyl) complexes of samarium and europium: (C5Me5)2Sm and (C5Me5)2Eu". Organometallics 5 (7): 1285. doi:10.1021/om00138a001.