Chemistry:Rhenium compounds

From HandWiki

Rhenium compounds are compounds formed by the transition metal rhenium (Re). Rhenium can form in many oxidation states, and compounds are known for every oxidation state from -3 to +7 except -2, although the oxidation states +7, +4, and +3 are the most common.[1] Rhenium is most available commercially as salts of perrhenate, including sodium and ammonium perrhenates. These are white, water-soluble compounds.[2] The tetrathioperrhenate anion [ReS4] is possible.[3]

Chalcogenides

Oxides

Rhenium(VI) oxide has an appearance similar to that of copper.

Rhenium(IV) oxide (or rhenium dioxide) is an oxide of rhenium, with the formula ReO2. This gray to black crystalline solid is a laboratory reagent that can be used as a catalyst. It adopts the rutile structure. It forms via comproportionation:[4]

2 Re2O7 + 3 Re → 7 ReO2

Single crystals are obtained by chemical transport, using iodine as the transporting agent.[5] At high temperatures it undergoes disproportionation. It forms perrhenates with alkaline hydrogen peroxide and oxidizing acids.[6] In molten sodium hydroxide it forms sodium rhenate.[7]

Rhenium(VI) oxide, or rhenium trioxide, is another oxide of rhenium. It is the only stable group 7 trioxide. It has an appearance somewhat like copper. It can be formed by reducing rhenium(VII) oxide with carbon monoxide at 200 °C or elemental rhenium at 400 °C.[8] Re2O7 can also be reduced with dioxane.[9] Rhenium trioxide crystallizes with a primitive cubic unit cell, with a lattice parameter of 3.742 Å (374.2 pm). The structure of ReO3 is similar to that of perovskite (ABO3), without the large A cation at the centre of the unit cell. Each rhenium center is surrounded by an octahedron defined by six oxygen centers. These octahedra share corners to form the 3-dimensional structure. The coordination number of O is 2, because each oxygen atom has 2 neighbouring Re atoms.[10]

Rhenium(VII) oxide, or rhenium heptoxide, is another oxide of rhenium. It is the anhydride form of perrhenic acid, and is the raw material for all rhenium compounds.[11] Solid Re2O7 consists of alternating octahedral and tetrahedral Re centres. Upon heating, the polymer cracks to give molecular (nonpolymeric) Re2O7. This molecular species closely resembles manganese heptoxide, consisting of a pair of ReO4 tetrahedra that share a vertex, i.e., O3Re–O–ReO3.[12]

Other chalcogenides

Rhenium disulfide is a sulfide with the formula ReS2. It has a layered structure where atoms are strongly bonded within each layer. The layers are held together by weak Van der Waals bonds, and can be easily peeled off from the bulk material. It is a two-dimensional (2D) group VII transition metal dichalcogenide (TMD). ReS2 was isolated down to monolayers which is only one unit cell in thickness for the first time in 2014.[13] ReS2 is found in nature as the mineral rheniite.[14] It can be synthesized from the reaction between rhenium and sulfur at 1000 °C, or the decomposition of rhenium(VII) sulfide at 1100 °C:[15]

Re + 2 S → ReS2
Re2S7 → 2 ReS2 + 3 S

Rhenium diselenide (ReSe2) also has a layered structure, although, contrary to the other dichalcogenides, rhenium ditelluride does not.[16] In addition, rhenium also forms a heptoxide, which can be produced by the direct reaction of those elements, or through the reaction of ReO4 and H2S in 4N HCl.[17]

Perrhenates

Sample of sodium perrhenate, NaReO4

The perrhenate ion is the anion with the formula ReO4, or a compound containing this ion. The perrhenate anion is tetrahedral, being similar in size and shape to perchlorate and the valence isoelectronic permanganate. The perrhenate anion is stable over a broad pH range and can be precipitated from solutions with the use of organic cations. At normal pH, perrhenate exists as metaperrhenate (ReO4), but at high pH mesoperrhenate (ReO3−5) forms. Perrhenate, like its conjugate acid perrhenic acid, features rhenium in the oxidation state of +7 with a d0 configuration. Solid perrhenate salts takes on the color of the cation.[18] These salts are prepared by oxidation of rhenium compounds with nitric acid followed by neutralization of the resulting perrhenic acid.[19][20][21] Addition of tetrabutylammonium chloride to aqueous solutions of sodium perrhenate gives tetrabutylammonium perrhenate, which is soluble in organic solvents.[22]

Halides

Rhenium can form at least four fluorides, of which rhenium heptafluoride is the most common. This is the only thermally stable metal heptafluoride.[23] It has a pentagonal bipyramidal structure similar to IF7,[24] and can be prepared by the direct reaction of the elements at 400 °C.[25] Combining this with additional rhenium metal at 300 °C in a pressure vessel would produce rhenium hexafluoride.[26] It is one of the seventeen known binary hexafluorides. Both of these fluorides have a very low melting point.[27] In addition to this, rhenium also forms a pentafluoride, which form yellow-green crystals,[28] and a tetrafluoride, which forms blue crystals.[29]

The most common rhenium chlorides are ReCl6, ReCl5, ReCl4, and ReCl3.[23] The structures of these compounds often feature extensive Re-Re bonding, which is characteristic of this metal in oxidation states lower than VII. Salts of [Re2Cl8]2− feature a quadruple metal-metal bond. Although the highest rhenium chloride features Re(VI), fluorine gives the d0 Re(VII) derivative rhenium heptafluoride. Rhenium(III) chloride (ReCl3 or sometimes written as Re3Cl9), is a dark-red hygroscopic solid that is insoluble in ordinary solvents. It can be prepared by the thermal decomposition of rhenium(V) chloride. It is an early example of a cluster compound with metal-metal bonds.[30] Rhenium(III) bromide also adopts the same structure, and is a black lustrous crystalline solid.[31][32] It can be obtained by the direct reaction between rhenium metal and bromine at 500 °C under nitrogen:[33]

6 Re + 9 Br2 → 2 Re3Br9

Rhenium also forms two iodides, rhenium tetraiodide, which can be reduced from perrhenic acid with hydrogen iodide, and rhenium triiodide, which forms from the decomposition of this.[34][35] Like tungsten and molybdenum, with which it shares chemical similarities, rhenium forms a variety of oxyhalides. The oxychlorides are most common, and include ReOCl4, ReOCl3.

Organometallic compounds

Dirhenium decacarbonyl is a common entry point to other rhenium carbonyls. The general patterns are similar to the related manganese carbonyls. It is possible to reduce this dimer with sodium amalgam to Na[Re(CO)5] with rhenium in the formal oxidation state −1. Bromination of dirhenium decacarbonyl gives bromopentacarbonylrhenium(I),[36] then reduced with zinc and acetic acid to pentacarbonylhydridorhenium:[37]

Re2(CO)10 + Br2 → 2 Re(CO)5Br
Re(CO)5Br + Zn + HOAc → Re(CO)5H + ZnBr(OAc)

Bromopentacarbonylrhenium(I) is readily decarbonylated. In refluxing water, it forms the triaquo cation:[38]

Re(CO)5Br + 3 H2O → [Re(CO)3(H2O)3]Br + 2 CO

With tetraethylammonium bromide Re(CO)5Br reacts to give the anionic tribromide:[39]

Re(CO)5Br + 2 NEt4Br → [NEt4]2[Re(CO)3Br3] + 2 CO
Structure of methylrhenium trioxide.

Rhenium forms a variety of alkyl and aryl derivatives, often with pi-donor coligands such as oxo groups. Well known is methylrhenium trioxide ("MTO"), CH3ReO3 a volatile, colourless solid, a rare example of a stable high-oxidation state metal alkyl complex. This compound has been used as a catalyst in some laboratory experiments. It can be prepared by many routes, a typical method is the reaction of Re2O7 and tetramethyltin:[40]

Re2O7 + (CH3)4Sn → CH3ReO3 + (CH3)3SnOReO3

Analogous alkyl and aryl derivatives are known. Although PhReO3 is unstable and decomposes at –30 °C, the corresponding sterically hindered mesityl and 2,6-xylyl derivatives (MesReO3 and 2,6-(CH3)2C6H3ReO3) are stable at room temperature. The electron poor 4-trifluoromethylphenylrhenium trioxide (4-CF3C6H4ReO3) is likewise relatively stable.[41] MTO and other organylrhenium trioxides catalyze oxidation reactions with hydrogen peroxide as well as olefin metathesis in the presence of a Lewis acid activator.[42] Terminal alkynes yield the corresponding acid or ester, internal alkynes yield diketones, and alkenes give epoxides. MTO also catalyses the conversion of aldehydes and diazoalkanes into an alkene.[43]

Rhenium is also able to make complexes with fullerene ligands such as Re2(PMe3)4H822C60).

One of the first transition metal hydride complexes to be reported was (C5H5)2ReH. A variety of half-sandwich compounds have been prepared from (C5H5)Re(CO)3 and (C5Me5)Re(CO)3. Notable derivatives include the electron-precise oxide (C5Me5)ReO3 and (C5H5)2Re2(CO)4.

Pictures of rhenium compounds

See also

References

  1. Housecroft, Catherine E.; Sharpe, Alan G. (2018). Inorganic Chemistry (5th ed.). Pearson Prentice-Hal. p. 829. ISBN 1292-13414-3. 
  2. Glemser, O. (1963) "Ammonium Perrhenate" in Handbook of Preparative Inorganic Chemistry, 2nd ed., G. Brauer (ed.), Academic Press, NY., Vol. 1, pp. 1476–85.
  3. Goodman, JT; Rauchfuss, TB (2002). Tetraethylammonium-tetrathioperrhenate [Et4N][ReS4]. Inorganic Syntheses. 33. pp. 107–110. doi:10.1002/0471224502.ch2. ISBN 0471208256. 
  4. G. Glemser "Rhenium (IV) Oxide" Handbook of Preparative Inorganic Chemistry, 2nd Ed. Edited by G. Brauer, Academic Press, 1963, NY. Vol. 1. p. 1480.
  5. Rogers, D. B.; Butler, S. R.; Shannon, R. D. (1972). "Single Crystals of Transition-Metal Dioxides". Inorganic Syntheses. XIII. pp. 135–145. doi:10.1002/9780470132449.ch27. ISBN 9780470132449. 
  6. "RHENIUM DIOXIDE - Manufacturer". Aaamolybdenum.com. Archived from the original on 2003-02-09. https://web.archive.org/web/20030209232809/http://www.aaamolybdenum.com/RheniumDioxide.html. Retrieved 2012-08-06. 
  7. G. Glemser "Sodium Rhenate (IV)" Handbook of Preparative Inorganic Chemistry, 2nd Ed. Edited by G. Brauer, Academic Press, 1963, NY. Vol. 1. p. 1483.
  8. H. Nechamkin, C. F. Hiskey, "Rhenium(VI): Oxide (Rhenium Trioxide)" Inorganic Syntheses, 1950 Volume 3, pp. 186-188. doi:10.1002/9780470132340.ch49
  9. G. Glemser "Rhenium (VI) Oxide" Handbook of Preparative Inorganic Chemistry, 2nd Ed. Edited by G. Brauer, Academic Press, 1963, NY. Vol. 2. p. 1482.
  10. Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 978-0-08-037941-8. , p. 1047.
  11. Georg Nadler, Hans (2000). "Ullmann's Encyclopedia of Industrial Chemistry". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a23_199. 
  12. Wells, A.F. (1984) Structural Inorganic Chemistry, Oxford: Clarendon Press. ISBN:0-19-855370-6.
  13. Tongay, Sefaattin; Sahin, Hasan; Ko, Changhyun; Luce, Alex; Fan, Wen; Liu, Kai; Zhou, Jian; Huang, Ying-Sheng et al. (2014). "Monolayer behaviour in bulk ReS2 due to electronic and vibrational decoupling". Nature Communications 5: 3252. doi:10.1038/ncomms4252. PMID 24500082. Bibcode2014NatCo...5.3252T. 
  14. Rheniite, MinDat.org, http://www.mindat.org/show.php?id=7269, retrieved 2020-07-17 
  15. Brauer, Georg (1981) (in de). Handbuch der Präparativen Anorganischen Chemie. Band III. (3rd ed.). Stuttgart: Ferdinand Enke. p. 1619. ISBN 3-432-87823-0. 
  16. Wildervanck, J.C; Jellinek, F (1971). "The dichalcogenides of technetium and rhenium". Journal of the Less Common Metals 24: 73–81. doi:10.1016/0022-5088(71)90168-8. 
  17. Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 978-0-08-037941-8. 
  18. Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 978-0-08-037941-8. 
  19. O. Glemser "Rhenium" in Handbook of Preparative Inorganic Chemistry, 2nd Ed. Edited by G. Brauer, Academic Press, 1963, NY. Vol. 1. p. 1476-85.
  20. Richard J. Thompson (1966). "Ammonium Perrhenate". Inorganic Syntheses. 8. pp. 171–173. doi:10.1002/9780470132395.ch44. ISBN 9780470132395. 
  21. Wm. T. Smith, S. Harmon Long (1948). "The Salts of Perrhenic Acid. I. The Alkali Metals and Ammonium". Journal of the American Chemical Society 70 (1): 354–356. doi:10.1021/ja01181a110. 
  22. Dilworth, J. R.; Hussain, W.; Hutson, A. J.; Jones, C. J.; McQuillan, F. S. (1997). "Tetrahalo Oxorhenate Anions". Inorganic Syntheses. pp. 257–262. doi:10.1002/9780470132623.ch42. ISBN 9780470132623. 
  23. 23.0 23.1 Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 978-0-08-037941-8. 
  24. Vogt T.; Fitch A. N.; Cockcroft J. K. (1994). "Crystal and Molecular Structures of Rhenium Heptafluoride". Science 263 (5151): 1265–7. doi:10.1126/science.263.5151.1265. PMID 17817431. Bibcode1994Sci...263.1265V. 
  25. Holleman, Arnold F.; Wiberg, Egon; Wiberg, Nils (1985). "Rhenium" (in de). Lehrbuch der Anorganischen Chemie (91–100 ed.). Walter de Gruyter. pp. 1118–1123. ISBN 978-3-11-007511-3. 
  26. Drews, Thomas; Supeł, Joanna; Hagenbach, Adelheid; Seppelt, Konrad (2006-05-01). "Solid State Molecular Structures of Transition Metal Hexafluorides" (in en). Inorganic Chemistry 45 (9): 3782–3788. doi:10.1021/ic052029f. ISSN 0020-1669. PMID 16634614. https://pubs.acs.org/doi/10.1021/ic052029f. 
  27. CRC handbook of chemistry and physics : a ready-reference book of chemical and physical data. David R. Lide (90th ed. 2009-2010 ed.). Boca Raton, Fla.: CRC Press. 2009. ISBN 978-1-4200-9084-0. OCLC 406781123. https://www.worldcat.org/oclc/406781123. 
  28. Colton, Ray (1965) (in en). The Chemistry of Rhenium and Technetium. Interscience Publishers. p. 59. ISBN 978-0-470-16650-5. https://books.google.com/books?id=F97QAAAAMAAJ&q=Rhenium+pentafluoride. Retrieved 6 April 2023. 
  29. "WebElements Periodic Table » Rhenium » rhenium tetrafluoride". webelements.com. https://www.webelements.com/compounds/rhenium/rhenium_tetrafluoride.html. 
  30. Cotton, F. A.; Walton, R. A. "Multiple Bonds Between Metal Atoms" Oxford (Oxford): 1993. ISBN:0-19-855649-7.
  31. V. V. Ugarov (1971). "Electron-diffraction investigation of the structure of the Re3Br9 molecule" (in English). Journal of Structural Chemistry 12 (2): 286–288. doi:10.1007/BF00739116. 
  32. Richard J. Thompson; Ronnie E. Foster; James L. Booker; Stephen J. Lippard (1967). "Rhenium(III) Bromide". in Muetterties, Earl (in English). Inorganic Syntheses. 10. McGraw-Hill, Inc.. pp. 58–61. doi:10.1002/9780470132418.ch9. ISBN 9780470132418. 
  33. Harro Hagen; Adolf Sieverts (1933). "Rheniumtribromid" (in German). Zeitschrift für anorganische und allgemeine Chemie (Verlag GmbH & Co. KGaA, Weinheim) 215 (1): 111–112. doi:10.1002/zaac.19332150114. 
  34. (in en) Inorganic Syntheses, Volume 7. John Wiley & Sons. 22 September 2009. p. 185. ISBN 978-0-470-13270-8. https://books.google.com/books?id=_MlO2NrHPHwC&dq=rhenium+triiodide&pg=PA185. Retrieved 6 May 2023. 
  35. Kemmitt, R. D. W.; Peacock, R. D. (26 January 2016) (in en). The Chemistry of Manganese, Technetium and Rhenium: Pergamon Texts in Inorganic Chemistry. Elsevier. p. 921. ISBN 978-1-4831-8762-4. https://books.google.com/books?id=c0n-BAAAQBAJ&dq=Rhenium+tetraiodide&pg=PA921. Retrieved 7 May 2023. 
  36. Schmidt, Steven P.; Trogler, William C.; Basolo, Fred (1990). Pentacarbonylrhenium Halides. Inorganic Syntheses. 28. pp. 154–159. doi:10.1002/9780470132593.ch42. ISBN 978-0-470-13259-3. 
  37. Michael A. Urbancic, John R. Shapley (1990). "Pentacarbonylhydridorhenium". Inorganic Syntheses. 28. pp. 165–168. doi:10.1002/9780470132593.ch43. ISBN 978-0-470-13259-3. 
  38. Lazarova, N.; James, S.; Babich, J.; Zubieta, J. (2004). "A convenient synthesis, chemical characterization and reactivity of [Re(CO)3(H2O)3]Br: the crystal and molecular structure of [Re(CO)3(CH3CN)2Br]". Inorganic Chemistry Communications 7 (9): 1023–1026. doi:10.1016/j.inoche.2004.07.006. 
  39. Alberto, R.; Egli, A.; Abram, U.; Hegetschweiler, K.; Gramlich V.; Schubiger, P. A. (1994). "Synthesis and reactivity of [NEt4]2[ReBr3(CO)3]. Formation and structural characterization of the clusters [NEt4][Re33-OH)(µ-OH)3(CO)9] and [NEt4][Re2(µ-OH)3(CO)6] by alkaline titration". J. Chem. Soc., Dalton Trans. (19): 2815–2820. doi:10.1039/DT9940002815. 
  40. Romão, Carlos C.; Kühn, Fritz E.; Herrmann, Wolfgang A. (1997). "Rhenium(VII) Oxo and Imido Complexes: Synthesis, Structures, and Applications". Chemical Reviews 97 (8): 3197–3246. doi:10.1021/cr9703212. PMID 11851489. 
  41. Dyckhoff, Florian; Li, Su; Reich, Robert M.; Hofmann, Benjamin J.; Herdtweck, Eberhardt; Kühn, Fritz E. (2018). "Synthesis, characterization and application of organorhenium(vii) trioxides in metathesis reactions and epoxidation catalysis" (in en). Dalton Transactions 47 (29): 9755–9764. doi:10.1039/c8dt02326c. ISSN 1477-9226. PMID 29987275. 
  42. Schmidt, Boris (1997). "Methyltrioxorhenium - from oxidation and cyclopropanation to metathesis" (in en). Journal für Praktische Chemie/Chemiker-Zeitung 339 (1): 493–496. doi:10.1002/prac.19973390190. ISSN 0941-1216. 
  43. Hudson, A. "Methyltrioxorhenium" Encyclopedia of Reagents for Organic Synthesis. John Wiley & Sons: New York, 2002.