Chemistry:PJ1 TrackBite

From HandWiki
Short description: Traction compound

PJ1 TrackBite (formerly known as VHT TrackBite or simply VHT) is a custom formulated synthetic resin, typically black in color, used in drag racing to either increase the traction of a car's tires or as a sealer for newly ground and/or resurfaced race tracks.[1] It stays sticky for weeks, has fire-retardant properties, and is hydrophobic. It has been used in professional racing since 1972.

The TrackBite that the National Hot Rod Association uses, is yellowish in color and is diluted with methanol for optimal effect.

The compound originated as a high temperature coating made for NASA by the Sperex Corporation. VHT, a brand owned by Sperex, began offering it for sale commercially. It was taken up by drag racers, and Sperex soon began producing formulations specially made for the sport. Sperex was purchased in 1989 by businessman P. J. Harvey and is now part of PJH Brands.

PJ1 in Non-Drag Racing Applications

Oval tracks also use TrackBite to provide extra traction in the corners of what would otherwise be a "one groove racetrack".

Its use was prohibited by NASCAR in 2010 to reduce the amount of chemicals used at its events. However, it was used at Bristol Motor Speedway in 2016, 2017, and 2018. Due to its frequent use in recent years at Bristol, TrackBite is often called "Bristol Bite."[2] At Bristol it is used on the bottom of the track in an attempt to restore racing in the bottom groove that has been lost with changes to the banking in 2007 and 2012.[3] Bristol and Charlotte both have regular Trackbite treatment trucks for their drag strips to prepare their tracks for their regular NHRA regional events along with their national events. Bristol's concrete surface uses the treatment similarly to the launch pad for the drag strip, which is concrete.

For the IndyCar, PJ1 causes various problems on the racetrack. The combination of lighter vehicles, harder tire compounds, and PJ1 results in less grip. Since the racing drivers avoid surfaces with PJ1 during the race, marbles from tire wear collect there. This leads to a slippery lane. In the IndyCar races of 2019, 2020, and 2021 at Texas Motor Speedway, this resulted in incidents attributable to PJ1.[4][5]

Formula One had an issue with the 2012 German Grand Prix with PJ1. Drivers were consistently using the treated sections of the Sudkurve, which doubles as the launch pad for the drag strip at Hockenheimring, to gain traction. That led to sandblasting of the circuit to remove the PJ1. The Fédération Internationale de l'Automobile was forced to cancel championship status of the European Drag Racing Championship round at Hockenheimring as professional categories were having issues with the cleaned circuit, even after it was reprepped. At the 2019 German Grand Prix, rain during the race led to numerous incidents when drivers slipped and crashed after running into the slick, PJ1-treated part of Hockenheim.

The following tracks used or are still using PJ1:

  • Bristol Motor Speedway (2016)[6][7]
  • Charlotte Motor Speedway (2017)[8]
  • New Hampshire Motor Speedway (2017)[9]
  • Michigan International Speedway (2019)[10]
  • Texas Motor Speedway (2019)[11]
  • Pocono Raceway (2019)[12]
  • Phoenix Raceway (2021)[13]

References

  1. "JEGS 63650: Maximum Traction Compound 1 Gallon". http://www.jegs.com/i/PJ1/870/SP162/10002/-1?parentProductId=749307. 
  2. "Bristol to apply traction compound for race weekend". 11 April 2018. http://www.espn.com/jayski/cup/2018/story/_/id/23121298/bristol-apply-traction-compound-race-weekend. 
  3. "Bristol Motor Speedway Adds Traction Compound for Fourth-Straight NASCAR Weekend". 12 April 2018. http://www.thedrive.com/accelerator/20078/bristol-motor-speedway-preps-for-nascar-weekend-with-traction-compound. 
  4. "'It's worse': IndyCar drivers blame Texas' single-lane racing for 2 crashes Saturday". https://www.msn.com/en-us/sports/motorsports/its-worse-indycar-drivers-blame-texas-single-lane-racing-for-2-crashes-saturday/ar-BB1ghrQv. 
  5. "How the PJ1 areas affected the racing at Texas this past weekend, what the drivers said and why INDYCAR should be applauded". 3 May 2021. https://racereviewonline.net/2021/05/02/how-the-pj1-areas-affected-the-racing-at-texas-this-past-weekend-what-the-drivers-said-and-why-indycar-should-be-applauded/. 
  6. "Track prep method made popular by BMS to return for Bass Pro Shops NRA Night Race week | Bristol News | Fan Info | Bristol Motor Speedway". http://www.bristolmotorspeedway.com/fans/news-archive/track-prep-method-made-popular-bms-return-for-bass-pro-shops-nra-night-race-week.html. 
  7. "Bristol Motor Speedway Adds Traction Compound for Fourth-Straight NASCAR Weekend". 12 April 2018. http://www.thedrive.com/accelerator/20078/bristol-motor-speedway-preps-for-nascar-weekend-with-traction-compound. 
  8. "NASCAR interested in expanding the use of TrackBite traction compound". 21 August 2017. http://autoweek.com/article/nascar/nascar-interested-expanding-use-trackbite-traction-compound. 
  9. "NASCAR: New Hampshire Motor Speedway adds sticky substance to turns". http://autoracingdaily.com/nascar-new-hampshire-motor-speedway-adds-sticky-substance-to-turns/. 
  10. "PJ1 is a sticky subject for Monster Energy NASCAR Cup drivers at Michigan". 10 August 2019. https://www.autoweek.com/racing/nascar/a2146671/pj1-sticky-subject-monster-energy-nascar-cup-drivers-michigan/. 
  11. "'It's worse': IndyCar drivers blame Texas' single-lane racing for 2 crashes Saturday". https://www.msn.com/en-us/sports/motorsports/its-worse-indycar-drivers-blame-texas-single-lane-racing-for-2-crashes-saturday/ar-BB1ghrQv. 
  12. "Pocono Raceway adds traction compound in all three turns". https://www.motorsport.com/nascar-cup/news/pocono-raceway-traction-compound/4492166/. 
  13. "Traction Compound Has Changed Phoenix "More Than We Realize."". 13 March 2021. https://newsfromthepits.com/2021/03/13/traction-compound-has-changed-phoenix-more-than-we-realize/. 

External links