Chemistry:Metal phosphine complex

From HandWiki

In coordination chemistry phosphines are L-type ligands. Unlike most metal ammine complexes, metal phosphine complexes tend to be lipophilic, displaying good solubility in organic solvents. They also are compatible with metals in multiple oxidation states. Because of these two features, metal phosphine complexes are useful in homogeneous catalysis.[1][2] Prominent examples of metal phosphine complexes include Wilkinson's catalyst (Rh(PPh3)3Cl), Grubbs' catalyst, and tetrakis(triphenylphosphine)palladium(0).[3]

Wilkinson's catalyst, a popular catalyst for hydrogenation.

Preparation

Many metal phosphine complexes are prepared by reactions of metal halides with preformed phosphines. For example, treatment of a suspension of palladium chloride in ethanol with triphenylphosphine yields monomeric bis(triphenylphosphine)palladium(II) chloride units.[4]

[PdCl2]n + 2n PPh3 → n PdCl2(PPh3)2

The first reported phosphine complexes were cis- and trans-PtCl2(PEt3)2 reported by Cahours and Gal in 1870.[5]

Often the phosphine serves both as a ligand and as a reductant. This property is illustrated by the synthesis of many platinum-metal complexes of triphenylphosphine:[6]

RhCl3(H2O)3 + 4 PPh3 → RhCl(PPh3)3 + OPPh3 + 2 HCl + 2 H2O

M-PR3 bonding

Phosphines primarily function as Lewis bases, interacting with metals as σ donor ligands.

TEP for selected phosphines[7]
L ν(CO) cm−1
P(t-Bu)3 2056.1
PMe3 2064.1
PPh3 2068.9
P(OEt)3 2076.3
PCl3 2097.0
PF3 2110.8

Phosphine ligands are also π-acceptors. Their π-acidity arises from overlap of P-C σ* anti-bonding orbitals with filled metal orbitals. Aryl- and fluorophosphines are stronger π-acceptors than alkylphosphines. Trifluorophosphine (PF3) is a strong π-acid with bonding properties akin to those of the carbonyl ligand.[8] In early work, phosphine ligands were thought to utilize 3d orbitals to form M-P pi-bonding, but it is now accepted that d-orbitals on phosphorus are not involved in bonding.[9] The energy of the σ* orbitals is lower for phosphines with electronegative substituents, and for this reason phosphorus trifluoride is a particularly good π-acceptor.[10]

Steric properties

220px|thumb|right|Cone angle is a common and useful parameter for evaluating the steric properties of phosphine ligands. In contrast to tertiary phosphines, tertiary amines, especially arylamine derivatives, are reluctant to bind to metals. The difference between the coordinating power of PR3 and NR3 reflects the greater steric crowding around the nitrogen atom, which is smaller.

By changes in one or more of the three organic substituents, the steric and electronic properties of phosphine ligands can be manipulated.[11] The steric properties of phosphine ligands can be ranked by their Tolman cone angle.[7]

Spectroscopy

An important technique for the characterization of metal-PR3 complexes is 31P NMR spectroscopy. Substantial shifts occur upon complexation. 31P-31P spin-spin coupling can provide insight into the structure of complexes containing multiple phosphine ligands.[12] [13]

Reactivity

Phosphine ligands are usually "spectator" rather than "actor" ligands. They generally do not participate in reactions, except to dissociate from the metal center. In certain high temperature hydroformylation reactions, the scission of P-C bonds is observed however.[14] The thermal stability of phosphines ligands is enhanced when they are incorporated into pincer complexes.

Applications to homogeneous catalysis

One of the first applications of phosphine ligands in catalysis was the use of triphenylphosphine in "Reppe" chemistry (1948), which included reactions of alkynes, carbon monoxide, and alcohols.[15] In his studies, Reppe discovered that this reaction more efficiently produced acrylic esters using NiBr2(PPh3)2 as a catalyst instead of NiBr2. Shell developed cobalt-based catalysts modified with trialkylphosphine ligands for hydroformylation (now a rhodium catalyst is more commonly used for this process).[16] The success achieved by Reppe and his contemporaries led to many industrial applications.[17]

Illustrative PPh3 complexes

Complexes of other organophosphorus ligands

The popularity and usefulness of phosphine complexes has led to the popularization of complexes of many related organophosphorus ligands.[5] Complexes of arsines have also been widely investigated, but are avoided in practical applications because of concerns about toxicity.

Complexes of primary and secondary phosphines

Most work focuses on complexes of triorganophosphines, but primary and secondary phosphines, respectively RPH2 and R2PH, also function as ligands. Such ligands are less basic and have small cone angles. These complexes are susceptible to deprotonation leading to phosphido-bridged dimers and oligomers:

2 LnM(PR2H)Cl → [LnM(μ-PR2)]2 + 2 HCl

Complexes of PRx(OR')3−x

Nickel(0) complexes of phosphites, e.g., Ni[P(OEt)3]4 are useful catalysts for hydrocyanation of alkenes. Related complexes are known for phosphinites (R2P(OR')) and phosphonites (RP(OR')2).

Diphosphine complexes

Due to the chelate effect, ligands with two phosphine groups bind more tightly to metal centers than do two monodentate phosphines. The conformational properties of diphosphines makes them especially useful in asymmetric catalysis, e.g. Noyori asymmetric hydrogenation. Several diphosphines have been developed, prominent examples include 1,2-bis(diphenylphosphino)ethane (dppe) and 1,1'-Bis(diphenylphosphino)ferrocene, the trans spanning xantphos and spanphos. The complex dichloro(1,3-bis(diphenylphosphino)propane)nickel is useful in Kumada coupling.

References

  1. Hartwig, J. F. Organotransition Metal Chemistry, from Bonding to Catalysis; University Science Books: New York, 2010. ISBN:1-891389-53-X
  2. Paul C. J. Kamer, Piet W. N. M. van Leeuwen, ed (2012). Phosphorus(III)Ligands in Homogeneous Catalysis: Design and Synthesis. New York: Wiley. ISBN 978-0-470-66627-2. 
  3. Iaroshenko, Viktor (4 January 2019). "Phosphines and Related Tervalent Phosphorus Systems". Organophosphorus Chemistry: From Molecules to Applications. doi:10.1002/9783527672240.ch1. ISBN 9783527672240. 
  4. Miyaura, Norio; Suzuki, Akira (1993). "Palladium-Catalyzed Reaction of 1-Alkenylboronates with Vinylic Halides: (1Z,3E)-1-Phenyl-1,3-octadiene". Org. Synth. 68: 130. doi:10.15227/orgsyn.068.0130. 
  5. 5.0 5.1 C. A. McAuliffe, ed (1973). Transition Metal Complexes of Phosphorus, Arsenic, and Antimony Ligands. J. Wiley. ISBN 0-470-58117-4. 
  6. Osborn, J. A.; Wilkinson, G. (1967). "Tris(triphenylphosphine)halorhodium(I)". Inorganic Syntheses 10: 67. doi:10.1002/9780470132418.ch12. 
  7. 7.0 7.1 Tolman, C. A. (1977). "Steric effects of Phosphorus Ligands in Organometallic Chemistry and Homogeneous Catalysis". Chemical Reviews 77 (3): 313–348. doi:10.1021/cr60307a002. 
  8. Orpen, A. G.; Connelly, N. G. (1990). "Structural Systematics: the Role of P-A σ* Orbitals in Metal-Phosphorus π-Bonding in Redox-Related Pairs of M-PA3 Complexes (A = R, Ar, OR; R = alkyl)". Organometallics 9 (4): 1206–1210. doi:10.1021/om00118a048. 
  9. Gilheany, D. G. (1994). "No d Orbitals but Walsh Diagrams and Maybe Banana Bonds: Chemical Bonding in Phosphines, Phosphine Oxides, and Phosphonium Ylides". Chem. Rev. 94 (5): 1339–1374. doi:10.1021/cr00029a008. 
  10. Crabtree, Robert H. (2009). The Organometallic Chemistry of the Transition Metals (5th ed.). Wiley. pp. 99–100. ISBN 978-0-470-25762-3. 
  11. R. H. Crabtree (2005). "4. Carbonyls, Phosphine Complexes, and Ligand Substitution Reactions". The Organometallic Chemistry of the Transition Metals (4th ed.). ISBN 0-471-66256-9. https://archive.org/details/The_Organometallic_Chemistry_Of_Transition_Metals. 
  12. Nelson, John H. (2003). Nuclear Magnetic Resonance Spectroscopy. ISBN 978-0130334510. 
  13. Paul S. Pregosin, Roland W. Kunz (2012). 31P and 13C NMR of Transition Metal Phosphine Complexes. Berlin: Springer. ISBN 9783642488306. 
  14. Garrou, Philip E. (1985). "Transition-Metal-Mediated Phosphorus-Carbon Bond Cleavage and Its Relevance to Homogeneous Catalyst Deactivation". Chem. Rev. 85: 171–185. doi:10.1021/cr00067a001. 
  15. Reppe, W.; Schweckendiek, W. J. (31 July 1948). "Cyclisierende Polymerisation von Acetylen. III Benzol, Benzolderivate und hydroaromatische Verbindungen". Justus Liebigs Annalen der Chemie 560 (1): 104–116. doi:10.1002/jlac.19485600104. 
  16. Slaugh, L; Mullineaux, R. (1968). "Novel Hydroformylation catalysts". J. Organomet. Chem. 13 (2): 469. doi:10.1016/S0022-328X(00)82775-8. 
  17. P. W.N.M. van Leeuwen "Homogeneous Catalysis: Understanding the Art, 2004 Kluwer, Dordrecht. ISBN:1-4020-2000-7
  18. Herrmann, W. A.; Kohlpaintner, C. W. (1998). "Syntheses of Water-Soluble Phosphines and Their Transition Metal Complexes". Inorg. Synth. 32: 8–25. doi:10.1002/9780470132630.ch2.