Chemistry:Boron trioxide

From HandWiki
Boron trioxide
Crystal structure of B2O3 [1]
Kristallstruktur Bortrioxid.png
Names
IUPAC name
Diboron trioxide
Other names
boron oxide, diboron trioxide, boron sesquioxide, boric oxide, boria
Boric anhydride
Identifiers
3D model (JSmol)
ChEBI
ChemSpider
EC Number
  • 215-125-8
11108
RTECS number
  • ED7900000
UNII
Properties
B2O3
Molar mass 69.6182 g/mol
Appearance white, glassy solid
Density 2.460 g/cm3, liquid;

2.55 g/cm3, trigonal;
3.11–3.146 g/cm3, monoclinic

Melting point 450 °C (842 °F; 723 K) (trigonal)
510 °C (tetrahedral)
Boiling point 1,860 °C (3,380 °F; 2,130 K) ,[2] sublimes at 1500 °C[3]
1.1 g/100mL (10 °C)
3.3 g/100mL (20 °C)
15.7 g/100mL (100 °C)
Solubility partially soluble in methanol
Acidity (pKa) ~ 4
−39.0·10−6 cm3/mol
Thermochemistry
66.9 J/(mol⋅K)
80.8 J/(mol⋅K)
−1254 kJ/mol
−832 kJ/mol
Hazards
Main hazards Irritant[4]
GHS pictograms GHS08: Health hazard
GHS Signal word Danger
H360FD
P201, P202, P281, P308+313, P405, P501
NFPA 704 (fire diamond)
Flammability code 0: Will not burn. E.g. waterHealth code 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformReactivity code 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no codeNFPA 704 four-colored diamond
0
2
0
Flash point noncombustible
Lethal dose or concentration (LD, LC):
3163 mg/kg (oral, mouse)[5]
NIOSH (US health exposure limits):
PEL (Permissible)
TWA 15 mg/m3[4]
REL (Recommended)
TWA 10 mg/m3[4]
IDLH (Immediate danger)
2000 mg/m3[4]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☑Y verify (what is ☑Y☒N ?)
Infobox references

Boron trioxide or diboron trioxide is the oxide of boron with the formula B
2
O
3
. It is a colorless transparent solid, almost always glassy (amorphous), which can be crystallized only with great difficulty. It is also called boric oxide[6] or boria.[7] It has many important industrial applications, chiefly in ceramics as a flux for glazes and enamels and in the production of glasses.

Structure

Boron trioxide has three known forms, one amorphous and two crystalline.

Amorphous form

The amorphous form (g-B
2
O
3
) is by far the most common. It is thought to be composed of boroxol rings which are six-membered rings composed of alternating 3-coordinate boron and 2-coordinate oxygen.

Because of the difficulty of building disordered models at the correct density with many boroxol rings, this view was initially controversial, but such models have recently been constructed and exhibit properties in excellent agreement with experiment.[8][9] It is now recognized, from experimental and theoretical studies,[10][11][12][13][14] that the fraction of boron atoms belonging to boroxol rings in glassy B
2
O
3
is somewhere between 0.73 and 0.83, with 0.75 = 3/4 corresponding to a 1:1 ratio between ring and non-ring units. The number of boroxol rings decays in the liquid state with increasing temperature.[15]

Crystalline α form

The crystalline form (α-B
2
O
3
) is exclusively composed of BO3 triangles. It crystal structure was initially believed to be the enantiomorphic space groups P31(#144) and P32(#145), like γ-glycine;[16][17] but was later revised to the enantiomorphic space groups P3121(#152) and P3221(#154) in the trigonal crystal system, like α-quartz[18]

Crystallization of α-B
2
O
3
from the molten state at ambient pressure is strongly kinetically disfavored (compare liquid and crystal densities). It can be obtained with prologed annealing of the amorphous solid ~200°C under at least 10 kbar of pressure.[19][1]

Crystalline β form

The trigonal network undergoes a coesite-like transformation to monoclinic β-B
2
O
3
at several gigapascals (9.5 GPa).[20]

Preparation

Boron trioxide is produced by treating borax with sulfuric acid in a fusion furnace. At temperatures above 750°C, the molten boron oxide layer separates out from sodium sulfate. It is then decanted, cooled and obtained in 96–97% purity.[3]

Another method is heating boric acid above ~300°C. Boric acid will initially decompose into steam, (H2O(g)) and metaboric acid (HBO2) at around 170°C, and further heating above 300°C will produce more steam and diboron trioxide. The reactions are:

H3BO3 → HBO2 + H2O
2 HBO2B
2
O
3
+ H2O

Boric acid goes to anhydrous microcrystalline B
2
O
3
in a heated fluidized bed.[21] Carefully controlled heating rate avoids gumming as water evolves.


Boron oxide will also form when diborane (B2H6) reacts with oxygen in the air or trace amounts of moisture:

2B2H6(g) + 3O2(g) → 2B
2
O
3
(s) + 6H2(g)
B2H6(g) + 3H2O(g) → B
2
O
3
(s) + 6H2(g)[22]

Reactions

Molten boron oxide attacks silicates. Containers can be passivated internally with a graphitized carbon layer obtained by thermal decomposition of acetylene.[23]

Applications

See also

References

  1. 1.0 1.1 Gurr, G. E.; Montgomery, P. W.; Knutson, C. D.; Gorres, B. T. (1970). "The Crystal Structure of Trigonal Diboron Trioxide". Acta Crystallographica B 26 (7): 906–915. doi:10.1107/S0567740870003369. 
  2. High temperature corrosion and materials chemistry: proceedings of the Per Kofstad Memorial Symposium. Proceedings of the Electrochemical Society. The Electrochemical Society. 2000. p. 496. ISBN 978-1-56677-261-7. https://books.google.com/books?id=ZrxSWmueNMQC&pg=PA496. 
  3. 3.0 3.1 Patnaik, P. (2003). Handbook of Inorganic Chemical Compounds. McGraw-Hill. p. 119. ISBN 978-0-07-049439-8. https://books.google.com/books?id=Xqj-TTzkvTEC&pg=PA119. Retrieved 2009-06-06. 
  4. 4.0 4.1 4.2 4.3 NIOSH Pocket Guide to Chemical Hazards. "#0060". National Institute for Occupational Safety and Health (NIOSH). https://www.cdc.gov/niosh/npg/npgd0060.html. 
  5. "Boron oxide". Immediately Dangerous to Life and Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH). https://www.cdc.gov/niosh/idlh/1303862.html. 
  6. L. McCulloch (1937): "A Crystalline Boric Oxide". Journal of the American Chemical Society, volume 59, issue 12, pages 2650–2652. doi:10.1021/ja01291a05
  7. I.Vishnevetsky and M.Epstein (2015): "Solar carbothermic reduction of alumina, magnesia and boria under vacuum". Solar Energy, volume 111, pages 236-251 doi:10.1016/j.solener.2014.10.039
  8. Ferlat, G.; Charpentier, T.; Seitsonen, A. P.; Takada, A.; Lazzeri, M.; Cormier, L.; Calas, G.; Mauri. F. (2008). "Boroxol Rings in Liquid and Vitreous B2O3 from First Principles". Phys. Rev. Lett. 101 (6): 065504. doi:10.1103/PhysRevLett.101.065504. PMID 18764473. Bibcode2008PhRvL.101f5504F. 
  9. Ferlat, G.; Seitsonen, A. P.; Lazzeri, M.; Mauri, F. (2012). "Hidden polymorphs drive vitrification in B2O3". Nature Materials Letters 11 (11): 925–929. doi:10.1038/NMAT3416. PMID 22941329. Bibcode2012NatMa..11..925F. 
  10. Hung, I. (2009). "Determination of the bond-angle distribution in vitreous B2O3 by rotation (DOR) NMR spectroscopy". Journal of Solid State Chemistry 182 (9): 2402–2408. doi:10.1016/j.jssc.2009.06.025. Bibcode2009JSSCh.182.2402H. 
  11. Soper, A. K. (2011). "Boroxol rings from diffraction data on vitreous boron trioxide". J. Phys.: Condens. Matter 23 (36): 365402. doi:10.1088/0953-8984/23/36/365402. PMID 21865633. Bibcode2011JPCM...23.5402S. https://zenodo.org/record/889447. 
  12. Joo, C. (2000). "The ring structure of boron trioxide glass". Journal of Non-Crystalline Solids 261 (1–3): 282–286. doi:10.1016/s0022-3093(99)00609-2. Bibcode2000JNCS..261..282J. 
  13. Zwanziger, J. W. (2005). "The NMR response of boroxol rings: a density functional theory study". Solid State Nuclear Magnetic Resonance 27 (1–2): 5–9. doi:10.1016/j.ssnmr.2004.08.004. PMID 15589722. 
  14. Micoulaut, M. (1997). "The structure of vitreous B2O3 obtained from a thermostatistical model of agglomeration". Journal of Molecular Liquids 71 (2–3): 107–114. doi:10.1016/s0167-7322(97)00003-2. 
  15. Alderman, O. L. G. Ferlat, G. Baroni, A. Salanne, M. Micoulaut, M. Benmore, C. J. Lin, A. Tamalonis, A. Weber, J. K. R. (2015). "Liquid B2O3 up to 1700K: X-ray diffraction and boroxol ring dissolution". Journal of Physics: Condensed Matter 27 (45): 455104. doi:10.1088/0953-8984/27/45/455104. PMID 26499978. Bibcode2015JPCM...27S5104A. https://hal.archives-ouvertes.fr/hal-01502196/file/Alderman%20et%20al.%20-%202015%20-%20Liquid%20B%202%20O%203%20up%20to%201700%20K%20x-ray%20diffraction%20and.pdf. 
  16. Gurr, G. E.; Montgomery, P. W.; Knutson, C. D.; Gorres, B. T. (1970). "The crystal structure of trigonal diboron trioxide". Acta Crystallographica B 26 (7): 906–915. doi:10.1107/S0567740870003369. 
  17. Strong, S. L.; Wells, A. F.; Kaplow, R. (1971). "On the crystal structure of B2O3". Acta Crystallographica B 27 (8): 1662–1663. doi:10.1107/S0567740871004515. 
  18. Effenberger, H.; Lengauer, C. L.; Parthé, E. (2001). "Trigonal B2O3 with Higher Space-Group Symmetry: Results of a Reevaluation". Monatshefte für Chemie 132 (12): 1515–1517. doi:10.1007/s007060170008. 
  19. Aziz, M. J.; Nygren, E.; Hays, J. F.; Turnbull, D. (1985). "Crystal Growth Kinetics of Boron Oxide Under Pressure". Journal of Applied Physics 57 (6): 2233. doi:10.1063/1.334368. Bibcode1985JAP....57.2233A. http://dash.harvard.edu/handle/1/3645198. 
  20. Brazhkin, V. V.; Katayama, Y.; Inamura, Y.; Kondrin, M. V.; Lyapin, A. G.; Popova, S. V.; Voloshin, R. N. (2003). "Structural transformations in liquid, crystalline and glassy B2O3 under high pressure". JETP Letters 78 (6): 393–397. doi:10.1134/1.1630134. Bibcode2003JETPL..78..393B. http://www.jetpletters.ac.ru/ps/47/article_679.shtml. 
  21. Kocakuşak, S.; Akçay, K.; Ayok, T.; Koöroğlu, H. J.; Koral, M.; Savaşçi, Ö. T.; Tolun, R. (1996). "Production of anhydrous, crystalline boron oxide in fluidized bed reactor". Chemical Engineering and Processing 35 (4): 311–317. doi:10.1016/0255-2701(95)04142-7. 
  22. AirProducts (2011). Diborane Storage & Delivery. http://www.airproducts.com/~/media/downloads/other/D/en-diborane-electronics-technical-bulletin.pdf. Retrieved 2013-08-21. 
  23. Morelock, C. R. (1961). Research Laboratory Report #61-RL-2672M. General Electric. 

External links