Chemistry:Barium chloride

From HandWiki
Barium chloride
Cotunnite structure.png
Barium chloride.jpg
Names
Other names
  • Barium dichloride
  • Barium muriate
  • Muryate of Barytes[1]
  • Neutral barium chloride
Identifiers
3D model (JSmol)
ChemSpider
EC Number
  • 233-788-1
RTECS number
  • CQ8750000 (anhydrous)
    CQ8751000 (dihydrate)
UNII
UN number 1564
Properties
BaCl
2
Molar mass 208.23 g/mol (anhydrous)
244.26 g/mol (dihydrate)
Appearance White powder, or colourless or white crystals (anhydrous)
Colourless rhomboidal crystals (dihydrate)[2][3]
Odor Odourless
Density 3.856 g/cm3 (anhydrous)
3.0979 g/cm3 (dihydrate)
Melting point 962 °C (1,764 °F; 1,235 K) (960 °C, dihydrate)
Boiling point 1,560 °C (2,840 °F; 1,830 K)
  • 31.2 g/(100 mL) (0 °C)
  • 35.8 g/(100 mL) (20 °C)
  • 59.4 g/(100 mL) (100 °C)
Solubility Soluble in methanol, insoluble ethyl acetate, slightly soluble in hydrochloric acid and nitric acid, very slightly soluble in ethanol.[4][3] The dihydrate of barium chloride is soluble in methanol, almost insoluble in ethanol, acetone and ethyl acetate.[3]
−72.6·10−6 cm3/mol
Structure
PbCl2-type orthorhombic (anhydrous)
monoclinic (dihydrate)
  • Of the Ba2+ cations:
  • 8 (the fluorite polymorph)
  • 9 (the cotunnite polymorph)
  • 10 (the post-cotunnite polymorph at pressures of 7–10 GPa)
Thermochemistry
123.9 J/(mol·K)
−858.56 kJ/mol
Hazards
Main hazards Highly toxic, corrosive
Safety data sheet NIH BaCl
GHS pictograms GHS06: Toxic
GHS Signal word Danger
H301, H302, H332
P261, P264, P270, P271, P301+310, P304+312, P304+340, P312, P321, P330, P405, P501
NFPA 704 (fire diamond)
Flammability code 0: Will not burn. E.g. waterHealth code 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasReactivity code 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no codeNFPA 704 four-colored diamond
0
3
0
Flash point Non-flammable
Lethal dose or concentration (LD, LC):
78 mg/kg (rat, oral)
50 mg/kg (guinea pig, oral)[6]
112 mg/kg (as Ba) (rabbit, oral)
59 mg/kg (as Ba) (dog, oral)
46 mg/kg (as Ba) (mouse, oral)[6]
NIOSH (US health exposure limits):
PEL (Permissible)
TWA 0.5 mg/m3[5]
REL (Recommended)
TWA 0.5 mg/m3[5]
IDLH (Immediate danger)
50 mg/m3[5]
Related compounds
Other anions
Other cations
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is ☑Y☒N ?)
Infobox references

Barium chloride is an inorganic compound with the formula BaCl
2
. It is one of the most common water-soluble salts of barium. Like most other water-soluble barium salts, it is a white powder, highly toxic, and imparts a yellow-green coloration to a flame. It is also hygroscopic, converting to the dihydrate BaCl
2
 · 2H2O
, which are colourless crystals with a bitter salty taste. It has limited use in the laboratory and industry.[7][3]

Preparation

On an industrial scale, barium chloride is prepared via a two step process from barite (barium sulfate).[8] The first step requires high temperatures.

BaSO
4
+ 4 CBaS + 4 CO

The second step requires reaction between barium sulfide and hydrogen chloride:

BaS + 2 HCl → BaCl
2
+ H
2
S

or between barium sulfide and calcium chloride:

BaS + CaCl
2
→ CaS + BaCl
2
[2]

In place of HCl, chlorine can be used.[7] Barium chloride is extracted out from the mixture with water. From water solutions of barium chloride, its dihydrate (BaCl
2
 · 2H2O
) can be crystallized as colorless crystals.[2]

Barium chloride can in principle be prepared by the reaction between barium hydroxide or barium carbonate with hydrogen chloride. These basic salts react with hydrochloric acid to give hydrated barium chloride.

Ba(OH)
2
+ 2 HCl → BaCl
2
+ 2 H
2
O
BaCO
3
+ 2 HCl → BaCl
2
+ H
2
O + CO
2

Structure and properties

BaCl
2
crystallizes in two forms (polymorphs). At room temperature, the compound is stable in the orthorhombic cotunnite (PbCl
2
) structure, whereas the cubic fluorite structure (CaF
2
) is stable between 925 and 963 °C.[9] Both polymorphs accommodate the preference of the large Ba2+ ion for coordination numbers greater than six.[10] The coordination of Ba2+ is 8 in the fluorite structure[11] and 9 in the cotunnite structure.[12] When cotunnite-structure BaCl
2
is subjected to pressures of 7–10 GPa, it transforms to a third structure, a monoclinic post-cotunnite phase. The coordination number of Ba2+ increases from 9 to 10.[13]

In aqueous solution BaCl
2
behaves as a simple salt; in water it is a 1:2 electrolyte[clarification needed] and the solution exhibits a neutral pH. Its solutions react with sulfate ion to produce a thick white precipitate of barium sulfate.

BaCl
2
+ Na
2
SO
4
→ 2 NaCl + BaSO
4

Oxalate effects a similar reaction:

BaCl
2
+ Na
2
C
2
O
4
→ 2 NaCl + BaC
2
O
4

When it is mixed with sodium hydroxide, it gives barium hydroxide, which is moderately soluble in water.

BaCl
2
+ 2 NaOH → 2 NaCl + Ba(OH)
2

BaCl
2
 · 2H2O
is stable in the air at room temperature, but loses one water of crystallization above 55 °C (131 °F), becoming BaCl
2
 · H2O
, and becomes anhydrous above 121 °C (250 °F).[2] BaCl
2
 · H2O
may be formed by shaking the dihydrate with methanol.[3]

BaCl
2
readily forms eutectics with alkali metal chlorides.[3]

Uses

Although inexpensive, barium chloride finds limited applications in the laboratory and industry.

Its main laboratory use is as a reagent for the gravimetric determination of sulfates. The sulfate compound being analyzed is dissolved in water and hydrochloric acid is added. When barium chloride solution is added, the sulfate present precipitates as barium sulfate, which is then filtered through ashless filter paper. The paper is burned off in a muffle furnace, the resulting barium sulfate is weighed, and the purity of the sulfate compound is thus calculated.

In industry, barium chloride is mainly used in the purification of brine solution in caustic chlorine plants and also in the manufacture of heat treatment salts, case hardening of steel.[7] It is also used to make red pigments such as Lithol red and Red Lake C. Its toxicity limits its applicability.[citation needed]

Toxicity

Barium chloride, along with other water-soluble barium salts, is highly toxic.[14] It irritates eyes and skin, causing redness and pain. It damages kidneys. Fatal dose of barium chloride for a human has been reported to be about 0.8-0.9 g. Systemic effects of acute barium chloride toxicity include abdominal pain, diarrhea, nausea, vomiting, cardiac arrhythmia, muscular paralysis, and death. The Ba2+ ions compete with the K+
ions, causing the muscle fibers to be electrically unexcitable, thus causing weakness and paralysis of the body.[3] Sodium sulfate and magnesium sulfate are potential antidotes because they form barium sulfate BaSO4, which is relatively non-toxic because of its insolubility in water.

Barium chloride is not classified as a human carcinogen.[3]

References

  1. Chemical Recreations: A Series of Amusing and Instructive Experiments, which May be Performed with Ease, Safety, Success, and Economy ; to which is Added, the Romance of Chemistry : An Inquiry into the Fallacies of the Prevailing Theory of Chemistry : With a New Theory and a New Nomenclature. R. Griffin & Company. 1834. https://play.google.com/books/reader?printsec=frontcover&output=reader&id=nKQ-AAAAYAAJ&pg=GBS.PA64. 
  2. 2.0 2.1 2.2 2.3 "Barium Chloride - an overview | ScienceDirect Topics". https://www.sciencedirect.com/topics/chemistry/barium-chloride. 
  3. 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 "Barium chloride". https://pubchem.ncbi.nlm.nih.gov/compound/Barium-chloride. 
  4. Handbook of Chemistry and Physics, 71st edition, CRC Press, Ann Arbor, Michigan, 1990.
  5. 5.0 5.1 5.2 NIOSH Pocket Guide to Chemical Hazards. "#0045". National Institute for Occupational Safety and Health (NIOSH). https://www.cdc.gov/niosh/npg/npgd0045.html. 
  6. 6.0 6.1 "Barium (soluble compounds, as Ba)". Immediately Dangerous to Life and Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH). https://www.cdc.gov/niosh/idlh/7440393.html. 
  7. 7.0 7.1 7.2 Kresse, Robert; Baudis, Ulrich; Jäger, Paul; Riechers, H. Hermann; Wagner, Heinz; Winkler, Jocher; Wolf, Hans Uwe (2007). "Barium and Barium Compounds". in Ullman, Franz. Ullmann's Encyclopedia of Industrial Chemistry. Wiley-VCH. doi:10.1002/14356007.a03_325.pub2. ISBN 978-3527306732. 
  8. Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 978-0-08-037941-8. 
  9. Edgar, A.; Zimmermann, J.; von Seggern, H.; Varoy, C. R. (2010-04-15). "Lanthanum-stabilized europium-doped cubic barium chloride: An efficient x-ray phosphor". Journal of Applied Physics (AIP Publishing) 107 (8): 083516. doi:10.1063/1.3369162. ISSN 0021-8979. 
  10. Wells, A. F. (1984) Structural Inorganic Chemistry, Oxford: Clarendon Press. ISBN:0-19-855370-6.
  11. Haase, A.; Brauer, G. (1978). "Hydratstufen und Kristallstrukturen von Bariumchlorid". Z. anorg. allg. Chem. 441: 181–195. doi:10.1002/zaac.19784410120. 
  12. Brackett, E. B.; Brackett, T. E.; Sass, R. L. (1963). "The Crystal Structures of Barium Chloride, Barium Bromide, and Barium Iodide". J. Phys. Chem. 67 (10): 2132. doi:10.1021/j100804a038. 
  13. Léger, J. M.; Haines, J.; Atouf, A. (1995). "The Post-Cotunnite Phase in BaCl2, BaBr2 and BaI2 under High Pressure". J. Appl. Crystallogr. 28 (4): 416. doi:10.1107/S0021889895001580. 
  14. The Merck Index, 7th edition, Merck & Co., Rahway, New Jersey, 1960.

External links