hep.aida.ref.histogram
Class DataPointSetFactory

java.lang.Object
  hep.aida.ref.histogram.DataPointSetFactory

All Implemented Interfaces:

IDataPointSetFactory

public class DataPointSetFactory
extends Object
implements IDataPointSetFactory

Basic user-level interface for creating a factory of IDataPointSet.

Constructor Summary

DataPointSetFactory()

DataPointSetFactory(ITree t)
Create an IDataPointSetFactory.

Method Summary

IDataPointSet	add(String path, IDataPointSet dataPointSet1, IDataPointSet dataPointSet2) Add two IDataSetPoint, point by point and measurement by measurement.
IDataPointSet	create(String path, ICloud1D cloud) Create an IDataPointSet from an ICloud1D.
IDataPointSet	create(String path, ICloud1D cloud, String options) Create an IDataPointSet from an ICloud1D.
IDataPointSet	create(String path, ICloud2D cloud) Create an IDataPointSet from an ICloud2D.
IDataPointSet	create(String path, ICloud2D cloud, String options) Create an IDataPointSet from an ICloud2D.
IDataPointSet	create(String path, ICloud3D cloud) Create an IDataPointSet from an ICloud3D.
IDataPointSet	create(String path, ICloud3D cloud, String options) Create an IDataPointSet from an ICloud3D.
IDataPointSet	create(String path, IHistogram1D hist) Create an IDataPointSet from an IHistogram1D.
IDataPointSet	create(String path, IHistogram1D hist, String options) Create an IDataPointSet from an IHistogram1D.
IDataPointSet	create(String path, IHistogram2D hist) Create an IDataPointSet from an IHistogram2D.
IDataPointSet	create(String path, IHistogram2D hist, String options) Create an IDataPointSet from an IHistogram2D.
IDataPointSet	create(String path, IHistogram3D hist) Create an IDataPointSet from an IHistogram3D.
IDataPointSet	create(String path, IHistogram3D hist, String options) Create an IDataPointSet from an IHistogram3D.
IDataPointSet	create(String pathAndTitle, int dimOfPoints) Create an empty IDataPointSet.
IDataPointSet	create(String pathAndTitle, int dimOfPoints, String options) Create an empty IDataPointSet.
IDataPointSet	create(String path, IProfile1D profile) Create an IDataPointSet from an IProfile1D.
IDataPointSet	create(String path, IProfile1D profile, String options) Create an IDataPointSet from an IProfile1D.
IDataPointSet	create(String path, IProfile2D profile) Create an IDataPointSet from an IProfile2D.
IDataPointSet	create(String path, IProfile2D profile, String options) Create an IDataPointSet from an IProfile2D.
IDataPointSet	create(String path, String title, int dimOfPoints) Create an empty IDataPointSet.
IDataPointSet	create(String path, String title, int dimOfPoints, String options) Create an empty IDataPointSet.
IDataPointSet	createCopy(String path, IDataPointSet dataPointSet) Make a copy of a given IDataPointSet.
IDataPointSet	createX(String path, double[] xVal, double[] xErr) Create a two dimensional IDataPointSet providing the data along x (the y value is the index of the x value in the array).
IDataPointSet	createX(String path, double[] xVal, double[] xErrPlus, double[] xErrMinus) Create a two dimensional IDataPointSet providing the data along x (the y value is the index of the x value in the array).
IDataPointSet	createX(String path, String title, double[] xVal, double[] xErr) Create a two dimensional IDataPointSet providing the data along x (the y value is the index of the x value in the array).
IDataPointSet	createX(String path, String title, double[] xVal, double[] xErrPlus, double[] xErrMinus) Create a two dimensional IDataPointSet providing the data along x (the y value is the index of the x value in the array).
IDataPointSet	createXY(String path, double[] xVal, double[] yVal, double[] xErr, double[] yErr) Create a two dimensional IDataPointSet providing the data.
IDataPointSet	createXY(String path, double[] xVal, double[] yVal, double[] xErrPlus, double[] yErrPlus, double[] xErrMinus, double[] yErrMinus) Create a two dimensional IDataPointSet providing the data.
IDataPointSet	createXY(String path, String title, double[] xVal, double[] yVal, double[] xErr, double[] yErr) Create a two dimensional IDataPointSet providing the data.
IDataPointSet	createXY(String path, String title, double[] xVal, double[] yVal, double[] xErrPlus, double[] yErrPlus, double[] xErrMinus, double[] yErrMinus) Create a two dimensional IDataPointSet providing the data.
IDataPointSet	createXYZ(String path, double[] xVal, double[] yVal, double[] zVal, double[] xErr, double[] yErr, double[] zErr) Create a two dimensional IDataPointSet providing the data.
IDataPointSet	createXYZ(String path, double[] xVal, double[] yVal, double[] zVal, double[] xErrPlus, double[] yErrPlus, double[] zErrPlus, double[] xErrMinus, double[] yErrMinus, double[] zErrMinus) Create a two dimensional IDataPointSet providing the data.
IDataPointSet	createXYZ(String path, String title, double[] xVal, double[] yVal, double[] zVal, double[] xErr, double[] yErr, double[] zErr) Create a three dimensional IDataPointSet providing the data.
IDataPointSet	createXYZ(String path, String title, double[] xVal, double[] yVal, double[] zVal, double[] xErrPlus, double[] yErrPlus, double[] zErrPlus, double[] xErrMinus, double[] yErrMinus, double[] zErrMinus) Create a three dimensional IDataPointSet providing the data.
IDataPointSet	createY(String path, double[] yVal, double[] yErr) Create a two dimensional IDataPointSet providing the data along y (the x value is the index of the y value in the array).
IDataPointSet	createY(String path, double[] yVal, double[] yErrPlus, double[] yErrMinus) Create a two dimensional IDataPointSet providing the data along y (the x value is the index of the y value in the array).
IDataPointSet	createY(String path, String title, double[] yVal, double[] yErr) Create a two dimensional IDataPointSet providing the data along y (the x value is the index of the y value in the array).
IDataPointSet	createY(String path, String title, double[] yVal, double[] yErrPlus, double[] yErrMinus) Create a two dimensional IDataPointSet providing the data along y (the x value is the index of the y value in the array).
void	destroy(IDataPointSet dataPointSet) Destroy a given IDataPointSet.
IDataPointSet	divide(String path, IDataPointSet dataPointSet1, IDataPointSet dataPointSet2) Divide two IDataSetPoint, point by point and measurement by measurement.
IDataPointSet	multiply(String path, IDataPointSet dataPointSet1, IDataPointSet dataPointSet2) Multiply two IDataSetPoint, point by point and measurement by measurement.
IDataPointSet	subtract(String path, IDataPointSet dataPointSet1, IDataPointSet dataPointSet2) Subtract two IDataSetPoint, point by point and measurement by measurement.
IDataPointSet	weightedMean(String path, IDataPointSet dataPointSet1, IDataPointSet dataPointSet2) Calculate weighted means of two IDataSetPoint, point by point and measurement by measurement.

Methods inherited from class java.lang.Object

equals, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Constructor Detail

DataPointSetFactory

public DataPointSetFactory(ITree t)

Create an IDataPointSetFactory.

Parameters:

t - The ITree which created IDataPointSet will be associated to.

Throws:

IllegalArgumentException - if tree is null.

DataPointSetFactory

public DataPointSetFactory()

Method Detail

create

public IDataPointSet create(String path,
                            String title,
                            int dimOfPoints)

Description copied from interface: IDataPointSetFactory

Create an empty IDataPointSet.

Specified by:

create in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataName" and "../folder/dataName" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

title - The title of the IDataPointSet.

dimOfPoints - The dimension of the IDataPoints that can be stored in the set. Options string must consist of series of parameters or key-value pairs that are separated by comma or semicolon ( "," or ";" ), white spaces are disregarded and will be trimmed away during parsing. Key-value pairs must be in a form: key=value, or key="value" (for values that contain spaces, commas, or other special characters). Single parameters may be converted to a parameter=true pair during parsing, like "verbose" -> "verbose=true". Any key that starts with "annotation." will be stripped of this prefix and put into annotation of newly created AIDA object.

Returns:

The newly created IDataPointSet.

create

public IDataPointSet create(String path,
                            String title,
                            int dimOfPoints,
                            String options)

Description copied from interface: IDataPointSetFactory

Create an empty IDataPointSet.

Specified by:

create in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataName" and "../folder/dataName" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

title - The title of the IDataPointSet.

dimOfPoints - The dimension of the IDataPoints that can be stored in the set.

options - The options for the IDataPointSet, currently not specified. The default is "". Options string must consist of series of parameters or key-value pairs that are separated by comma or semicolon ( "," or ";" ), white spaces are disregarded and will be trimmed away during parsing. Key-value pairs must be in a form: key=value, or key="value" (for values that contain spaces, commas, or other special characters). Single parameters may be converted to a parameter=true pair during parsing, like "verbose" -> "verbose=true". Any key that starts with "annotation." will be stripped of this prefix and put into annotation of newly created AIDA object.

Returns:

The newly created IDataPointSet.

create

public IDataPointSet create(String pathAndTitle,
                            int dimOfPoints,
                            String options)

Description copied from interface: IDataPointSetFactory

Create an empty IDataPointSet.

Specified by:

create in interface IDataPointSetFactory

Parameters:

pathAndTitle - The path of the IDataPointSet. The path can either be a relative or full path. The last part of the path is used as the title. ("/folder1/folder2/dataTitle" and "../folder/dataTitle" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

dimOfPoints - The dimension of the IDataPoints that can be stored in the set.

options - The options for the IDataPointSet, currently not specified. The default is "". Options string must consist of series of parameters or key-value pairs that are separated by comma or semicolon ( "," or ";" ), white spaces are disregarded and will be trimmed away during parsing. Key-value pairs must be in a form: key=value, or key="value" (for values that contain spaces, commas, or other special characters). Single parameters may be converted to a parameter=true pair during parsing, like "verbose" -> "verbose=true". Any key that starts with "annotation." will be stripped of this prefix and put into annotation of newly created AIDA object.

Returns:

The newly created IDataPointSet.

create

public IDataPointSet create(String pathAndTitle,
                            int dimOfPoints)

Description copied from interface: IDataPointSetFactory

Create an empty IDataPointSet.

Specified by:

create in interface IDataPointSetFactory

Parameters:

pathAndTitle - The path of the IDataPointSet. The path can either be a relative or full path. The last part of the path is used as the title. ("/folder1/folder2/dataTitle" and "../folder/dataTitle" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

dimOfPoints - The dimension of the IDataPoints that can be stored in the set. Options string must consist of series of parameters or key-value pairs that are separated by comma or semicolon ( "," or ";" ), white spaces are disregarded and will be trimmed away during parsing. Key-value pairs must be in a form: key=value, or key="value" (for values that contain spaces, commas, or other special characters). Single parameters may be converted to a parameter=true pair during parsing, like "verbose" -> "verbose=true". Any key that starts with "annotation." will be stripped of this prefix and put into annotation of newly created AIDA object.

Returns:

The newly created IDataPointSet.

createCopy

public IDataPointSet createCopy(String path,
                                IDataPointSet dataPointSet)

Description copied from interface: IDataPointSetFactory

Make a copy of a given IDataPointSet.

Specified by:

createCopy in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataName" and "../folder/dataName" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

dataPointSet - The IDataPointSet to be copied.

Returns:

The copy of the given IDataPointSet.

destroy

public void destroy(IDataPointSet dataPointSet)
             throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Destroy a given IDataPointSet.

Specified by:

destroy in interface IDataPointSetFactory

Parameters:

dataPointSet - The IDataPointSet to be destroyed.

Throws:

IllegalArgumentException - If dataPointSet cannot be destroyed.

create

public IDataPointSet create(String path,
                            IHistogram1D hist)
                     throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create an IDataPointSet from an IHistogram1D.

Specified by:

create in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataName" and "../folder/dataName" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

hist - The IHistogram1D from which the data is taken. Options string must consist of series of parameters or key-value pairs that are separated by comma or semicolon ( "," or ";" ), white spaces are disregarded and will be trimmed away during parsing. Key-value pairs must be in a form: key=value, or key="value" (for values that contain spaces, commas, or other special characters). Single parameters may be converted to a parameter=true pair during parsing, like "verbose" -> "verbose=true". Any key that starts with "annotation." will be stripped of this prefix and put into annotation of newly created AIDA object.

Returns:

The newly created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

create

public IDataPointSet create(String path,
                            IHistogram1D hist,
                            String options)
                     throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create an IDataPointSet from an IHistogram1D.

Specified by:

create in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataName" and "../folder/dataName" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

hist - The IHistogram1D from which the data is taken.

options - Options, currently not specified. The default is "". Options string must consist of series of parameters or key-value pairs that are separated by comma or semicolon ( "," or ";" ), white spaces are disregarded and will be trimmed away during parsing. Key-value pairs must be in a form: key=value, or key="value" (for values that contain spaces, commas, or other special characters). Single parameters may be converted to a parameter=true pair during parsing, like "verbose" -> "verbose=true". Any key that starts with "annotation." will be stripped of this prefix and put into annotation of newly created AIDA object.

Returns:

The newly created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

create

public IDataPointSet create(String path,
                            IHistogram2D hist)
                     throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create an IDataPointSet from an IHistogram2D.

Specified by:

create in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataName" and "../folder/dataName" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

hist - The IHistogram2D from which the data is taken. Options string must consist of series of parameters or key-value pairs that are separated by comma or semicolon ( "," or ";" ), white spaces are disregarded and will be trimmed away during parsing. Key-value pairs must be in a form: key=value, or key="value" (for values that contain spaces, commas, or other special characters). Single parameters may be converted to a parameter=true pair during parsing, like "verbose" -> "verbose=true". Any key that starts with "annotation." will be stripped of this prefix and put into annotation of newly created AIDA object.

Returns:

The newly created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

create

public IDataPointSet create(String path,
                            IHistogram2D hist,
                            String options)
                     throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create an IDataPointSet from an IHistogram2D.

Specified by:

create in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataName" and "../folder/dataName" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

hist - The IHistogram2D from which the data is taken.

options - Options, currently not specified. The default is "". Options string must consist of series of parameters or key-value pairs that are separated by comma or semicolon ( "," or ";" ), white spaces are disregarded and will be trimmed away during parsing. Key-value pairs must be in a form: key=value, or key="value" (for values that contain spaces, commas, or other special characters). Single parameters may be converted to a parameter=true pair during parsing, like "verbose" -> "verbose=true". Any key that starts with "annotation." will be stripped of this prefix and put into annotation of newly created AIDA object.

Returns:

The newly created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

create

public IDataPointSet create(String path,
                            IHistogram3D hist)
                     throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create an IDataPointSet from an IHistogram3D.

Specified by:

create in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataName" and "../folder/dataName" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

hist - The IHistogram3D from which the data is taken. Options string must consist of series of parameters or key-value pairs that are separated by comma or semicolon ( "," or ";" ), white spaces are disregarded and will be trimmed away during parsing. Key-value pairs must be in a form: key=value, or key="value" (for values that contain spaces, commas, or other special characters). Single parameters may be converted to a parameter=true pair during parsing, like "verbose" -> "verbose=true". Any key that starts with "annotation." will be stripped of this prefix and put into annotation of newly created AIDA object.

Returns:

The newly created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

create

public IDataPointSet create(String path,
                            IHistogram3D hist,
                            String options)
                     throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create an IDataPointSet from an IHistogram3D.

Specified by:

create in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataName" and "../folder/dataName" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

hist - The IHistogram3D from which the data is taken.

options - Options, currently not specified. The default is "". Options string must consist of series of parameters or key-value pairs that are separated by comma or semicolon ( "," or ";" ), white spaces are disregarded and will be trimmed away during parsing. Key-value pairs must be in a form: key=value, or key="value" (for values that contain spaces, commas, or other special characters). Single parameters may be converted to a parameter=true pair during parsing, like "verbose" -> "verbose=true". Any key that starts with "annotation." will be stripped of this prefix and put into annotation of newly created AIDA object.

Returns:

The newly created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

create

public IDataPointSet create(String path,
                            ICloud1D cloud)
                     throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create an IDataPointSet from an ICloud1D.

Specified by:

create in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataName" and "../folder/dataName" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

cloud - The ICloud1D from which the data is taken. Options string must consist of series of parameters or key-value pairs that are separated by comma or semicolon ( "," or ";" ), white spaces are disregarded and will be trimmed away during parsing. Key-value pairs must be in a form: key=value, or key="value" (for values that contain spaces, commas, or other special characters). Single parameters may be converted to a parameter=true pair during parsing, like "verbose" -> "verbose=true". Any key that starts with "annotation." will be stripped of this prefix and put into annotation of newly created AIDA object.

Returns:

The newly created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

create

public IDataPointSet create(String path,
                            ICloud1D cloud,
                            String options)
                     throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create an IDataPointSet from an ICloud1D.

Specified by:

create in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataName" and "../folder/dataName" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

cloud - The ICloud1D from which the data is taken.

options - Options, currently not specified. The default is "". Options string must consist of series of parameters or key-value pairs that are separated by comma or semicolon ( "," or ";" ), white spaces are disregarded and will be trimmed away during parsing. Key-value pairs must be in a form: key=value, or key="value" (for values that contain spaces, commas, or other special characters). Single parameters may be converted to a parameter=true pair during parsing, like "verbose" -> "verbose=true". Any key that starts with "annotation." will be stripped of this prefix and put into annotation of newly created AIDA object.

Returns:

The newly created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

create

public IDataPointSet create(String path,
                            ICloud2D cloud)
                     throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create an IDataPointSet from an ICloud2D.

Specified by:

create in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataName" and "../folder/dataName" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

cloud - The ICloud2D from which the data is taken. Options string must consist of series of parameters or key-value pairs that are separated by comma or semicolon ( "," or ";" ), white spaces are disregarded and will be trimmed away during parsing. Key-value pairs must be in a form: key=value, or key="value" (for values that contain spaces, commas, or other special characters). Single parameters may be converted to a parameter=true pair during parsing, like "verbose" -> "verbose=true". Any key that starts with "annotation." will be stripped of this prefix and put into annotation of newly created AIDA object.

Returns:

The newly created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

create

public IDataPointSet create(String path,
                            ICloud2D cloud,
                            String options)
                     throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create an IDataPointSet from an ICloud2D.

Specified by:

create in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataName" and "../folder/dataName" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

cloud - The ICloud2D from which the data is taken.

options - Options, currently not specified Options string must consist of series of parameters or key-value pairs that are separated by comma or semicolon ( "," or ";" ), white spaces are disregarded and will be trimmed away during parsing. Key-value pairs must be in a form: key=value, or key="value" (for values that contain spaces, commas, or other special characters). Single parameters may be converted to a parameter=true pair during parsing, like "verbose" -> "verbose=true". Any key that starts with "annotation." will be stripped of this prefix and put into annotation of newly created AIDA object.

Returns:

The newly created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

create

public IDataPointSet create(String path,
                            ICloud3D cloud)
                     throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create an IDataPointSet from an ICloud3D.

Specified by:

create in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataName" and "../folder/dataName" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

cloud - The ICloud3D from which the data is taken. Options string must consist of series of parameters or key-value pairs that are separated by comma or semicolon ( "," or ";" ), white spaces are disregarded and will be trimmed away during parsing. Key-value pairs must be in a form: key=value, or key="value" (for values that contain spaces, commas, or other special characters). Single parameters may be converted to a parameter=true pair during parsing, like "verbose" -> "verbose=true". Any key that starts with "annotation." will be stripped of this prefix and put into annotation of newly created AIDA object.

Returns:

The newly created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

create

public IDataPointSet create(String path,
                            ICloud3D cloud,
                            String options)
                     throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create an IDataPointSet from an ICloud3D.

Specified by:

create in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataName" and "../folder/dataName" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

cloud - The ICloud3D from which the data is taken.

options - Options, currently not specified. The default is "". Options string must consist of series of parameters or key-value pairs that are separated by comma or semicolon ( "," or ";" ), white spaces are disregarded and will be trimmed away during parsing. Key-value pairs must be in a form: key=value, or key="value" (for values that contain spaces, commas, or other special characters). Single parameters may be converted to a parameter=true pair during parsing, like "verbose" -> "verbose=true". Any key that starts with "annotation." will be stripped of this prefix and put into annotation of newly created AIDA object.

Returns:

The newly created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

create

public IDataPointSet create(String path,
                            IProfile1D profile)
                     throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create an IDataPointSet from an IProfile1D.

Specified by:

create in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataName" and "../folder/dataName" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

profile - The IProfile1D from which the data is taken. Options string must consist of series of parameters or key-value pairs that are separated by comma or semicolon ( "," or ";" ), white spaces are disregarded and will be trimmed away during parsing. Key-value pairs must be in a form: key=value, or key="value" (for values that contain spaces, commas, or other special characters). Single parameters may be converted to a parameter=true pair during parsing, like "verbose" -> "verbose=true". Any key that starts with "annotation." will be stripped of this prefix and put into annotation of newly created AIDA object.

Returns:

The newly created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

create

public IDataPointSet create(String path,
                            IProfile1D profile,
                            String options)
                     throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create an IDataPointSet from an IProfile1D.

Specified by:

create in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataName" and "../folder/dataName" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

profile - The IProfile1D from which the data is taken.

options - Options, currently not specified. The default is "". Options string must consist of series of parameters or key-value pairs that are separated by comma or semicolon ( "," or ";" ), white spaces are disregarded and will be trimmed away during parsing. Key-value pairs must be in a form: key=value, or key="value" (for values that contain spaces, commas, or other special characters). Single parameters may be converted to a parameter=true pair during parsing, like "verbose" -> "verbose=true". Any key that starts with "annotation." will be stripped of this prefix and put into annotation of newly created AIDA object.

Returns:

The newly created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

create

public IDataPointSet create(String path,
                            IProfile2D profile)
                     throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create an IDataPointSet from an IProfile2D.

Specified by:

create in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataName" and "../folder/dataName" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

profile - The IProfile2D from which the data is taken. Options string must consist of series of parameters or key-value pairs that are separated by comma or semicolon ( "," or ";" ), white spaces are disregarded and will be trimmed away during parsing. Key-value pairs must be in a form: key=value, or key="value" (for values that contain spaces, commas, or other special characters). Single parameters may be converted to a parameter=true pair during parsing, like "verbose" -> "verbose=true". Any key that starts with "annotation." will be stripped of this prefix and put into annotation of newly created AIDA object.

Returns:

The newly created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

create

public IDataPointSet create(String path,
                            IProfile2D profile,
                            String options)
                     throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create an IDataPointSet from an IProfile2D.

Specified by:

create in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataName" and "../folder/dataName" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

profile - The IProfile2D from which the data is taken.

options - Options, currently not specified. The default is "". Options string must consist of series of parameters or key-value pairs that are separated by comma or semicolon ( "," or ";" ), white spaces are disregarded and will be trimmed away during parsing. Key-value pairs must be in a form: key=value, or key="value" (for values that contain spaces, commas, or other special characters). Single parameters may be converted to a parameter=true pair during parsing, like "verbose" -> "verbose=true". Any key that starts with "annotation." will be stripped of this prefix and put into annotation of newly created AIDA object.

Returns:

The newly created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

add

public IDataPointSet add(String path,
                         IDataPointSet dataPointSet1,
                         IDataPointSet dataPointSet2)
                  throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Add two IDataSetPoint, point by point and measurement by measurement.

Specified by:

add in interface IDataPointSetFactory

Parameters:

path - The path of resulting the IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataName" and "../folder/dataName" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

dataPointSet1 - The first member of the addition.

dataPointSet2 - The second member of the addition.

Throws:

IllegalArgumentException - if the two IDataPointSet to be added have different dimensions and/or sizes, or if a directory in the path does not exist, or the path is illegal.

subtract

public IDataPointSet subtract(String path,
                              IDataPointSet dataPointSet1,
                              IDataPointSet dataPointSet2)
                       throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Subtract two IDataSetPoint, point by point and measurement by measurement.

Specified by:

subtract in interface IDataPointSetFactory

Parameters:

path - The path of the resulting IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataName" and "../folder/dataName" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

dataPointSet1 - The first member of the subtraction.

dataPointSet2 - The second member of the subtraction. uncorrelated Gaussian error propagation.

Throws:

IllegalArgumentException - if the two IDataPointSet to be subtracted have different dimensions and/or sizes, or if a directory in the path does not exist, or the path is illegal.

multiply

public IDataPointSet multiply(String path,
                              IDataPointSet dataPointSet1,
                              IDataPointSet dataPointSet2)
                       throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Multiply two IDataSetPoint, point by point and measurement by measurement.

Specified by:

multiply in interface IDataPointSetFactory

Parameters:

path - The path of the resulting IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataName" and "../folder/dataName" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

dataPointSet1 - The first member of the multiplication.

dataPointSet2 - The second member of the multiplication. uncorrelated Gaussian error propagation.

Throws:

IllegalArgumentException - if the two IDataPointSet to be multiplied have different dimensions and/or sizes, or if a directory in the path does not exist, or the path is illegal.

divide

public IDataPointSet divide(String path,
                            IDataPointSet dataPointSet1,
                            IDataPointSet dataPointSet2)
                     throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Divide two IDataSetPoint, point by point and measurement by measurement.

Specified by:

divide in interface IDataPointSetFactory

Parameters:

path - The path of resulting the IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataName" and "../folder/dataName" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

dataPointSet1 - The first member of the division.

dataPointSet2 - The second member of the division. uncorrelated Gaussian error propagation.

Throws:

IllegalArgumentException - if the two IDataPointSet to be divided have different dimensions and/or sizes, or if a directory in the path does not exist, or the path is illegal.

weightedMean

public IDataPointSet weightedMean(String path,
                                  IDataPointSet dataPointSet1,
                                  IDataPointSet dataPointSet2)
                           throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Calculate weighted means of two IDataSetPoint, point by point and measurement by measurement.

Specified by:

weightedMean in interface IDataPointSetFactory

Parameters:

path - The path of the resulting IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataName" and "../folder/dataName" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

dataPointSet1 - The first IDataPointSet.

dataPointSet2 - The second IDataPointSet. uncorrelated Gaussian error propagation.

Throws:

IllegalArgumentException - if the two IDataPointSet have different dimensions and/or sizes, or if a directory in the path does not exist, or the path is illegal.

createX

public IDataPointSet createX(String path,
                             double[] xVal,
                             double[] xErr)
                      throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create a two dimensional IDataPointSet providing the data along x (the y value is the index of the x value in the array).

Specified by:

createX in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. The last part of the path is used as the title. ("/folder1/folder2/dataTitle" and "../folder/dataTitle" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

xVal - The array of the x values

xErr - The array with the symmetric errors on x

Returns:

The created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

createX

public IDataPointSet createX(String path,
                             String title,
                             double[] xVal,
                             double[] xErr)
                      throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create a two dimensional IDataPointSet providing the data along x (the y value is the index of the x value in the array).

Specified by:

createX in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataTitle" and "../folder/dataTitle" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

title - The title of the IDataPointSet.

xVal - The array of the x values

xErr - The array with the symmetric errors on x

Returns:

The created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

createX

public IDataPointSet createX(String path,
                             double[] xVal,
                             double[] xErrPlus,
                             double[] xErrMinus)
                      throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create a two dimensional IDataPointSet providing the data along x (the y value is the index of the x value in the array).

Specified by:

createX in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. The last part of the path is used as the title. ("/folder1/folder2/dataTitle" and "../folder/dataTitle" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

xVal - The array of the x values

xErrPlus - The array with the plus errors on x

xErrMinus - The array with the minus errors on x

Returns:

The created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

createX

public IDataPointSet createX(String path,
                             String title,
                             double[] xVal,
                             double[] xErrPlus,
                             double[] xErrMinus)
                      throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create a two dimensional IDataPointSet providing the data along x (the y value is the index of the x value in the array).

Specified by:

createX in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataTitle" and "../folder/dataTitle" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

title - The title of the IDataPointSet.

xVal - The array of the x values

xErrPlus - The array with the plus errors on x

xErrMinus - The array with the minus errors on x

Returns:

The created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

createY

public IDataPointSet createY(String path,
                             double[] yVal,
                             double[] yErr)
                      throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create a two dimensional IDataPointSet providing the data along y (the x value is the index of the y value in the array).

Specified by:

createY in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. The last part of the path is used as the title. ("/folder1/folder2/dataTitle" and "../folder/dataTitle" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

yVal - The array of the y values

yErr - The array with the symmetric errors on y

Returns:

The created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

createY

public IDataPointSet createY(String path,
                             double[] yVal,
                             double[] yErrPlus,
                             double[] yErrMinus)
                      throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create a two dimensional IDataPointSet providing the data along y (the x value is the index of the y value in the array).

Specified by:

createY in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. The last part of the path is used as the title. ("/folder1/folder2/dataTitle" and "../folder/dataTitle" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

yVal - The array of the y values

yErrPlus - The array with the plus errors on y

yErrMinus - The array with the minus errors on y

Returns:

The created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

createY

public IDataPointSet createY(String path,
                             String title,
                             double[] yVal,
                             double[] yErr)
                      throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create a two dimensional IDataPointSet providing the data along y (the x value is the index of the y value in the array).

Specified by:

createY in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataTitle" and "../folder/dataTitle" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

title - The title of the IDataPointSet.

yVal - The array of the y values

yErr - The array with the symmetric errors on y

Returns:

The created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

createY

public IDataPointSet createY(String path,
                             String title,
                             double[] yVal,
                             double[] yErrPlus,
                             double[] yErrMinus)
                      throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create a two dimensional IDataPointSet providing the data along y (the x value is the index of the y value in the array).

Specified by:

createY in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataTitle" and "../folder/dataTitle" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

title - The title of the IDataPointSet.

yVal - The array of the y values

yErrPlus - The array with the plus errors on y

yErrMinus - The array with the minus errors on y

Returns:

The created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

createXY

public IDataPointSet createXY(String path,
                              double[] xVal,
                              double[] yVal,
                              double[] xErr,
                              double[] yErr)
                       throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create a two dimensional IDataPointSet providing the data.

Specified by:

createXY in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. The last part of the path is used as the title. ("/folder1/folder2/dataTitle" and "../folder/dataTitle" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

xVal - The array of the x values

yVal - The array of the y values

xErr - The array with the symmetric errors on x

yErr - The array with the symmetric errors on y

Returns:

The created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

createXY

public IDataPointSet createXY(String path,
                              String title,
                              double[] xVal,
                              double[] yVal,
                              double[] xErr,
                              double[] yErr)
                       throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create a two dimensional IDataPointSet providing the data.

Specified by:

createXY in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataTitle" and "../folder/dataTitle" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

title - The title of the IDataPointSet.

xVal - The array of the x values

yVal - The array of the y values

xErr - The array with the symmetric errors on x

yErr - The array with the symmetric errors on y

Returns:

The created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

createXY

public IDataPointSet createXY(String path,
                              double[] xVal,
                              double[] yVal,
                              double[] xErrPlus,
                              double[] yErrPlus,
                              double[] xErrMinus,
                              double[] yErrMinus)
                       throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create a two dimensional IDataPointSet providing the data.

Specified by:

createXY in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. The last part of the path is used as the title. ("/folder1/folder2/dataTitle" and "../folder/dataTitle" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

xVal - The array of the x values

yVal - The array of the y values

xErrPlus - The array with the plus errors on x

yErrPlus - The array with the plus errors on y

xErrMinus - The array with the minus errors on x

yErrMinus - The array with the minus errors on y

Returns:

The created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

createXY

public IDataPointSet createXY(String path,
                              String title,
                              double[] xVal,
                              double[] yVal,
                              double[] xErrPlus,
                              double[] yErrPlus,
                              double[] xErrMinus,
                              double[] yErrMinus)
                       throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create a two dimensional IDataPointSet providing the data.

Specified by:

createXY in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataTitle" and "../folder/dataTitle" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

title - The title of the IDataPointSet.

xVal - The array of the x values

yVal - The array of the y values

xErrPlus - The array with the plus errors on x

yErrPlus - The array with the plus errors on y

xErrMinus - The array with the minus errors on x

yErrMinus - The array with the minus errors on y

Returns:

The created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

createXYZ

public IDataPointSet createXYZ(String path,
                               double[] xVal,
                               double[] yVal,
                               double[] zVal,
                               double[] xErr,
                               double[] yErr,
                               double[] zErr)
                        throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create a two dimensional IDataPointSet providing the data.

Specified by:

createXYZ in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. The last part of the path is used as the title. ("/folder1/folder2/dataTitle" and "../folder/dataTitle" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

xVal - The array of the x values

yVal - The array of the y values

zVal - The array of the z values

Returns:

The created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

createXYZ

public IDataPointSet createXYZ(String path,
                               String title,
                               double[] xVal,
                               double[] yVal,
                               double[] zVal,
                               double[] xErr,
                               double[] yErr,
                               double[] zErr)
                        throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create a three dimensional IDataPointSet providing the data.

Specified by:

createXYZ in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataTitle" and "../folder/dataTitle" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

title - The title of the IDataPointSet.

xVal - The array of the x values

yVal - The array of the y values

zVal - The array of the z values

xErr - The array with the symmetric errors on x

yErr - The array with the symmetric errors on y

zErr - The array with the symmetric errors on z

Returns:

The created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

createXYZ

public IDataPointSet createXYZ(String path,
                               double[] xVal,
                               double[] yVal,
                               double[] zVal,
                               double[] xErrPlus,
                               double[] yErrPlus,
                               double[] zErrPlus,
                               double[] xErrMinus,
                               double[] yErrMinus,
                               double[] zErrMinus)
                        throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create a two dimensional IDataPointSet providing the data.

Specified by:

createXYZ in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. The last part of the path is used as the title. ("/folder1/folder2/dataTitle" and "../folder/dataTitle" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

xVal - The array of the x values

yVal - The array of the y values

zVal - The array of the z values

xErrPlus - The array with the plus errors on x

yErrPlus - The array with the plus errors on y

zErrPlus - The array with the plus errors on z

xErrMinus - The array with the minus errors on x

yErrMinus - The array with the minus errors on y

zErrMinus - The array with the minus errors on z

Returns:

The created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.

createXYZ

public IDataPointSet createXYZ(String path,
                               String title,
                               double[] xVal,
                               double[] yVal,
                               double[] zVal,
                               double[] xErrPlus,
                               double[] yErrPlus,
                               double[] zErrPlus,
                               double[] xErrMinus,
                               double[] yErrMinus,
                               double[] zErrMinus)
                        throws IllegalArgumentException

Description copied from interface: IDataPointSetFactory

Create a three dimensional IDataPointSet providing the data.

Specified by:

createXYZ in interface IDataPointSetFactory

Parameters:

path - The path of the IDataPointSet. The path can either be a relative or full path. ("/folder1/folder2/dataTitle" and "../folder/dataTitle" are valid paths). All the directories in the path must exist. The characther `/` cannot be used in names; it is only used to delimit directories within paths.

title - The title of the IDataPointSet.

xVal - The array of the x values

yVal - The array of the y values

zVal - The array of the z values

xErrPlus - The array with the plus errors on x

yErrPlus - The array with the plus errors on y

zErrPlus - The array with the plus errors on z

xErrMinus - The array with the minus errors on x

yErrMinus - The array with the minus errors on y

zErrMinus - The array with the minus errors on z

Returns:

The created IDataPointSet.

Throws:

IllegalArgumentException - if a directory in the path does not exist, or the path is illegal.